№ 2 (143) (ТПМ ІПБТ)

Permanent URI for this collection

https://crust.ust.edu.ua/handle/123456789/19396

Browse

Browsing № 2 (143) (ТПМ ІПБТ) by Author "Kamkin, V. Yu."

Now showing 1 - 1 of 1
  • Thumbnail Image
    Item
    Coordinated Control of the Composition of 01yut Steel and Deformation Processing Modes to Achieve Specified Mechanical Properties
    (National Metallurgical Academy of Ukraine, Ukrainian State University of Science and Technologies, Dnipro, 2024) Velychko, A. G.; Kamkin, V. Yu.; Proidak, Yurii S.
    ENG: Purpose: to investigate the influence of the chemical composition of steel on the output from the chipboard and to establish rational parameters of deoxidation and deformation to ensure the specified values of mechanical properties. Methods: physicochemical modeling, thermodynamic calculations, experimental studies. Results: the carbon content and the degree of oxidation of the semi-finished product from the electric furnace for further vacuum treatment to obtain low-carbon steel were determined. With an increase in the oxygen flow rate supplied to the chipboard and exceeding the value required for the stoichiometry of fuel combustion reactions, the oxidation of the semi-finished product increases. To avoid the formation of calcium silicates, it is necessary to have an active oxygen content below 2.5 ppm, which is ensured by the residual content of dissolved aluminum in steel of 0.025-0.027%. Scientific novelty: The use of complex deoxidizers in steel production allows using the synergistic effect of the joint deoxidizing action of deoxidizing elements. The use of the methodology of physicochemical modeling made it possible to effectively solve the problem of predicting the properties of steel. To study the influence of modifier elements, as well as the main alloying components, a number of parameters characterizing the state of the alloy as a whole (Zу, d) were calculated. Based on information on the significant influence of the chemical composition of the steel on its properties, a database of 150 compositions was prepared to determine the optimal composition of ultra-low-carbon steels of the 01ЮТ, 01ЮТА type by the method of physicochemical modeling. Based on the calculations, the concentrations of elements for steels of the 01ЮТ and 01ЮТА grades were selected.