Кафедра Галузеве машинобудування ДМетІ (з 2022 р. утворилась шляхом з'єднання кафедри Колісних і гусеничних транспортних засобів та кафедри Машини та агрегати металургійного виробництва)

Permanent URI for this community

http://crust.ust.edu.ua/handle/123456789/16490

ENG: Faculty of Machine Design and Environmental Protection Dnipro Metallurgical Institute

Browse

Now showing 1 - 3 of 3

Advancement of Risk Analysis Methods during Prolonging the Service Life of Industrial Equipment
(Springer Nature Switzerland AG, 2023) Belodedenko, Sergii V.; Bilichenko, Galyna M.; Hanush, Vasyl I.; Izhevskyi, Y.
ENG: The aim of the work was to trace the relationship between the durability of the equipment and its maintenance strategy. This is done by examples of basic structures of industrial equipment. They have a long service life and during this time manage to accumulate certain damages that need to be diagnosed, after which decisions on its maintenance and repair must be made. Problems associated with the technique for extending the service life of industrial equipment are addressed. The authors have created a technique called the resource safety index (RSI), which uses this characteristic as a diagnostic metric. The usage of the risk function to control the technical state of base structures is shown in this study. It is demonstrated how the behavior of the risk function afects the choice of the inspection model. A risk function model for base structures is proposed, which is based on the concepts of stepwise assignment of the limit state and the corresponding useful life. An algorithm for determining the optimal period of restoration measures according to minimizing the cost intensity criterion, where the risk indicator is a parameter, has been developed. The proposed concepts were put into practice when deciding on the further operation of the housings of the 350 pipes rolling unit. The housings of the piercing mill and the automatic mill, which had been in operation for 80 years, were diagnosed. For the frst time, it was discovered that the housings risk function at the crack break through point stage can be represented by a linear dependence directly proportional to the accumulation of operating time. One of the signs of deterioration in the technical condition of rolling mill stands is a malfunction of the system of fxing and securing the housings.
Estimating the Residual Resource of Basic Structures Using a Model of Fatigue Durability under Complex Loading
(PC TECHNOLOGY CENTER, Kharkiv, 2022) Belodedenko, Sergey V.; Hrechanyi, Oleksii M.; Hanush, Vasyl I.; Vlasov, Andrii
ENG: This paper reports the construction of a durability model of basic structures, which takes into consideration the complex stressed state under the cyclic action of the complex load. The models that take into consideration this factor are categorized on the basis of equivalent for a certain indicator of the stressed-strained state. The equivalence models based on the tangent stresses and strains have been recognized as the most effective ones. However, they hold when the ratio of the limits of fatigue under tangent and normal stresses exceeds 0.5. In addition, determining the latter requires specific testing equipment. The concept of basic bearing structures for industrial equipment has been formulated. The issue related to the multi-axis fatigue of basic structures was considered from the standpoint of combining the reliability indicators of systems. The durability model has been derived from the rule of combining resource safety indices. The load is represented as a combination of individual subprocesses of simple types of deformation with their amplitudes and asymmetries. A model of durability with multi-axis fatigue has been built, which takes into consideration the parameters of the form of the strain cycle, and the type of process (synphase, disproportionate, unchanging static stress). The possibility of obtaining parameters for the multi-axis fatigue model during tests for three-point bending under conditions of varying the multiplicity of the span has been confirmed. According to this scheme, fatigue tests of prismatic samples of the steels 09G2 and 40H were carried out. For them, the parameters of fatigue resistance were found; additionally, the ratio of the fatigue limit for tangent stresses of displacement and fatigue limits for normal bending stresses, which is equal to 0.385, was established. A test procedure has been devised to determine the initial data for the multi-axle fatigue model, which is suitable for conventional test machines and simple-shape samples. The latter advantage is important precisely for basic structures, from fragments of which it is difficult to fabricate a sample of a complex shape.
Experimental and Analytical Ways of Finding the Function of the Maximum Accumulated Damage under Operating Modes with Overloads
(Elsevier B.V., Amsterdam, Netherlands, 2024) Belodedenko, Sergii V.; Hrechanyi, Oleksii. M.; Hanush, Vasyl I.; Izhevskyi, Y.
ENG: The problem of overloading was characterized as a factor of load history in the modern resource assessment methodology. The signs by which a loading cycle can be considered an overload were defined. A correlation was obtained between the failure mechanics approach and the damage accumulation approach to survivability prediction. An experimental and analytical method of its adjustment has been developed based on the regularities of the impact of loads on the accumulated damage. Its use in obtaining models of damage accumulation in 40Cr and 35CrMnSi steels was shown. New experimental data were obtained on the behavior of the accumulated damage function in the stress localization zones during bending, and an explanation of its non-monotonicity under the influence of operational factors was found.

Browse

Results Per Page

Sort Options