Кафедра "Іноземні мови" ДІІТ
Permanent URI for this community
ENG: Department of Foreign Languages DIIT
Browse
Browsing Кафедра "Іноземні мови" ДІІТ by Author "Bannikov, Dmytro O."
Now showing 1 - 4 of 4
Results Per Page
Sort Options
Item Controlling the Dynamic Characteristics of Steel Bunker Containers for Bulk Materials(IOP Conference Series: Earth and Environmental Science, 2024) Bannikov, Dmytro O.; Tiutkin, Oleksii L.; Hezentsvei, Yukhym; Muntian, Antonina O.ENG: The article presents the main results of research devoted to the definition and analysis of the dynamic characteristics of steel small-sized bunker containers for storing bulk materials. All studies were carried out using the finite element method with the use computer complex SCAD. The object of research was a bunker of a bypass track for feeding bulk materials with a total volume of up to 70 m3. The study analysed the natural partial frequency spectrum and the partial oscillation modes of individual load-bearing elements of the bunker. Based on the results of the data analysis, a rather high quantitative density of the natural frequency spectrum was determined. At the same time, its lower limit is about 25-30 Hz for an empty bunker capacity and decreases to 3-5 Hz when the bunker is fully loaded, which is dangerous from the point of view of the possibility of resonance phenomena. In order to qualitatively and quantitatively control the dynamic characteristics, it was proposed to change the steel strength of the structure, which made it possible to change the natural frequencies by about 15% for every 100 MPa change in steel strength for the bunker containers of the considered type.Item Efficiency Estimation of the Shaped Hot Rolled Steel Product Mix of India and Ukraine(Національний університет будівництва і архітектури, Київ, 2019) Gaidaichuk, Victor V; Bannikov, Dmytro O.; Radkevych, Anatolii V.; Muntian, Antonina O.ENG: The publication presents main results of the performed quantitative and qualitative analysis of modern shaped rolled metal products of India, which is used for structural steel members. Its efficiency was compared to the current domestic product range of Ukraine on the example of angle bars, channel sections and flanged beams. Special attention is paid to the system of designations and marking of product mix items. The publication presents the main results of the quantitative and qualitative analysis of the modern hot rolled steel assortment of India, which is used for steel building structures. The shaped hot rolled steel products are considered, represented in the standards of both countries by four types of profiles – equal leg angles, unequal leg angles, channel and beams. Special attention is paid to the system of designations and labeling of products of the assortment. In general, it should be noted that the overall organization and principle of construction of the analyzed assortments of India and Ukraine are quite similar. The main fundamental difference is the availability in the standard of India of a wider range of profile varieties within one step, which makes it possible to more efficiently choose the required section in the design. However, the step itself is widely than in domestic standards, which negates such dignity. Angels profiles in the Indian assortment have a wider range of thicknesses and are represented by a large number of sizes, especially for unequal leg angles, which is connected with a significant distribution of such profiles in the supporting elements of steel structures. Channel profiles in general have approximately the same degree of efficiency and the number of standard sizes in the assortments of both countries. In the standard of India, profiles with flange slopped shelves are displayed in more way and, in the domestic standard, with parallel shelves. Beam profiles have the largest number of sizes in both assortments, but unlike the domestic standard in India's standard, they are presented only in cross-sections with flange slopped shelves. In this case, the profiles aimed at bending, according to the domestic assortment have specific characteristics averaged on 15 – 40 % higher with a less on 30 – 40 % by weight. For profiles of heavy series, oriented also on the perception of longitudinal forces, sections in the Indian assortment have higher specific characteristics and less weight on average by 20 – 30 %.Item Modelling of the Electric Locomotion DS3 Working(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Bannikov, Dmytro O.; Radkevich, Anatoliy V.; Muntian, Antonina O.ENG: Abstract. The purpose of the work is to evaluate the spatial distribution of the rigidity of the carrier frame and the body of the Ukrainian electric locomotive DC3 as a single system during operation and repair. The research was carried out on the basis of the finite element method with the application of design and computing complex SCAD for Windows. The numerical model of the electric locomotive was built, tested and then used to identify the causes and providing guidance on solving some specific operational questions. They are included, for example, the possibility of eliminating the body skew when jacking up on jacks and jamming the door as a result. The researches showed that the structure of the electric locomotive DS3 in general has a rather high spatial rigidity, both in transverse and longitudinal directions, and on torsion. However, for some practical repair tasks there is not enough for that rigidity. It was recommended to increase the thickness of the shell of its body up to 4 mm or the roof up to 8 mm, which leads to an increasing in the total mass of the machine by about 2,5 and 3,5 tons, respectively.Item Modernization of the Buffer Beam of PE2U Traction Unit Electric Locomotive(IOP Publishing, 2020) Bannikov, Dmytro O.; Radkevich, Anatolii V.; Muntian, Antonina O.ENG: The article presents the main results of a theoretical study on the analysis of the stress-strain state of the construction of the buffer bar of the electric locomotive for the control of the traction unit PE2U. The estimation of the possibility and effectiveness of attachment on the front wall of the buffer beam of a special securing bracket was considered as a separate task. In both cases, the finite element method based on the SCAD for Windows computing system was used. As a result, it was found that in general, the design of the buffer beam does not meet the requirements of the current standards. Up to 5 zones of high stress concentration are present in the structure, which, given the long service life of the machines (up to 40-50 years), are potential places for the development of fatigue damage. In order to balance the stress level, we recommended to strengthen the contact zone of the supports under the automatic coupling with the system of horizontal truss plates. The additional recommendation is to reinforce the lower sheet of the buffer beam structure up to and including its replacement by a sheet of greater thickness. Attachment to the front wall of the buffer beam of a special securing bracket for holding in emergency mode the coupling of the locomotive-car is possible provided that this zone is strengthened by the system of additional truss plates. The total increase in the mass of the buffer beam reaches 350 kg (25 % of the original weight of the buffer beam structure).