Збереження енергоресурсів під час термічної обробки бетону за рахунок використання добавок
Loading...
Date
2024
Journal Title
Journal ISSN
Volume Title
Publisher
Український державний університет науки і технологій, Дніпро
Abstract
UKR: Метою роботи є термічна обробка (пропарювання) бетону та залізобетонних виробів як ефективний метод прискорення твердіння бетону. Термічна обробка бетону – один з найвідповідальніших будівельних процесів. Відомі випадки, коли через підвищену температуру бетону і великі перепади температур виникали надмірні температурні напруги, в результаті чого утворювалися тріщини. Вибираючи спосіб термічної обробки бетону, в першу чергу необхідно враховувати можливість використання енергозберігаючого методу. Його розширенням є введення добавок – прискорювачів твердіння бетону та цементів підвищеної тепловиділення (швидкодіючих і якісних), а також пластифікаторів і суперпластифікаторів. Методологія. Для скорочення тривалості термічної обробки або зниження температури ізотермічного нагріву запропоновано використовувати добавку, отриману на основі шламів металообробних підприємств. У роботі використано стандартні методи дослідження визначення фізико-механічних властивостей залізобетону та якості комплексних добавок згідно ДСТУ 9208:2022, ДСТУ Б В. 2.7-2.7-114-2002, ДСТУ Б В.2.7-215: 2009 р. ДСТУ Б В. 2.7-214:2009. Висновки. Досліджено вплив комплексної добавки на основі шламу на властивості залізобетону. Запропонована добавка підвищує міцність бетону при всіх прийнятих режимах термообробки порівняно з міцністю бетону без такої добавки. Оригінальністю отриманих результатів є наступна, теоретично обґрунтована та експериментально підтверджена комплексна добавка до бетону на основі шламу (кеку) металообробних підприємств. Показано вплив добавки на характеристики міцності бетону, підданого термічній обробці за різних режимів, і бетону природного твердіння. Практична цінність. Результати роботи впроваджені у виробництво залізобетонних виробів і конструкцій.
ENG: Purpose of the work is heat treatment (steaming) of concrete and reinforced concrete products as an effective method of accelerating concrete hardening. Heat treatment of concrete is one of the most responsible construction processes. There are known cases when, due to the increased temperature of the concrete and large temperature differences, excessive temperature stresses arose, as a result of which cracks were formed. When choosing a method of heat treatment of concrete, you must first consider the possibility of using an energy saving method. Its extension is the introduction of additives – concrete hardening accelerators and cements of increased heat release (fast-acting and high-quality), as well as plasticizers and superplasticizers. Methodology. To reduce the duration of heat treatment or reduce the temperature of isothermal heating, it is proposed to use an additive obtained on the basis of the sludge of metal processing enterprises. The work uses standard research methods to determine the physical and mechanical properties of reinforced concrete and the quality of complex additives in accordance with DSTU 9208:2022, DSTU B V. 2.7-2.7-114-2002, DSTU B V.2.7-215:2009, DSTU B V. 2.7-214:2009. Findings. The effect of a complex slurry-based additive on the properties of reinforced concrete was investigated. The proposed additive increases the strength of concrete in all accepted heat treatment modes compared to the strength of concrete without such an additive. Originality of the obtained results is the following, theoretically substantiated and experimentally confirmed complex additive to concrete based on sludge (cake) of metal processing enterprises. The effect of the additive on the strength characteristics of concrete subjected to heat treatment under different regimes and natural hardening concrete is shown. Practical value. The results of the work are implemented in the production of reinforced concrete products and structures.
ENG: Purpose of the work is heat treatment (steaming) of concrete and reinforced concrete products as an effective method of accelerating concrete hardening. Heat treatment of concrete is one of the most responsible construction processes. There are known cases when, due to the increased temperature of the concrete and large temperature differences, excessive temperature stresses arose, as a result of which cracks were formed. When choosing a method of heat treatment of concrete, you must first consider the possibility of using an energy saving method. Its extension is the introduction of additives – concrete hardening accelerators and cements of increased heat release (fast-acting and high-quality), as well as plasticizers and superplasticizers. Methodology. To reduce the duration of heat treatment or reduce the temperature of isothermal heating, it is proposed to use an additive obtained on the basis of the sludge of metal processing enterprises. The work uses standard research methods to determine the physical and mechanical properties of reinforced concrete and the quality of complex additives in accordance with DSTU 9208:2022, DSTU B V. 2.7-2.7-114-2002, DSTU B V.2.7-215:2009, DSTU B V. 2.7-214:2009. Findings. The effect of a complex slurry-based additive on the properties of reinforced concrete was investigated. The proposed additive increases the strength of concrete in all accepted heat treatment modes compared to the strength of concrete without such an additive. Originality of the obtained results is the following, theoretically substantiated and experimentally confirmed complex additive to concrete based on sludge (cake) of metal processing enterprises. The effect of the additive on the strength characteristics of concrete subjected to heat treatment under different regimes and natural hardening concrete is shown. Practical value. The results of the work are implemented in the production of reinforced concrete products and structures.
Description
Т. Дехта: ORCID 0000-0001-5023-3070; O. Громова: ORCID 0000-0002-5149-4165; С. Василенко: ORCID 0000-0001-8687-4726
Keywords
залізобетон, комплексна добавка, міцність, режим термічної обробки, міцність на стиск, reinforced concrete, complex additive, strength, mode of heat treatment, compressive strength, КАПЗБМ
Citation
Дехта Т. М., Громова О. В., Василенко С. Збереження енергоресурсів під час термічної обробки бетону за рахунок використання добавок. Мости та тунелі: теорія, дослідження, практика. 2024. Вип. 25. С. 46-52. DOI: 10.15802/bttrp2024/303292.