Дослідження кінетики азотування мало- та безнікелевих корозійностійких сталей в твердому стані
dc.contributor.author | Пройдак, Юрій Сергійович | uk_UA |
dc.contributor.author | Підгорний, Сергій Миколайович | uk_UA |
dc.contributor.author | Трегубенко, Геннадій Миколайович | uk_UA |
dc.contributor.author | Поляков, Георгій Анатолійович | uk_UA |
dc.contributor.author | Палаш, Богдан Валерійович | uk_UA |
dc.date.accessioned | 2022-06-25T18:05:59Z | |
dc.date.available | 2022-06-25T18:05:59Z | |
dc.date.issued | 2021 | |
dc.description | Ю. Пройдак: ORCID 0000-0001-7380-055X; Г. Трегубенко: ORCID 0000-0001-5353-9593 | uk_UA |
dc.description.abstract | UKR: Мета. Дослідження кінетики азотування в твердому стані прокату з мало- та безнікелевих корозійностійких сталей на усю товщину для отримання стійкої аустенітної структури. Методика. Азотування зразків проводилося у вакуумній печі при температурах 1200-13500С при витримках від 2-х до 30-ти годин. Температуру заміряли платино-платинородієвою термопарою з точністю до +100С. В процесі нагріву зразків тиск азоту підтримували постійним. Після витягання зразків з печі виконували їх аналіз: рентгеноструктурний, пошаровий, металографічний та хімічного складу, у тому разі на вміст азоту. Результати. Результати проведеної роботи свідчать про принципову можливість азотування Сr-Мn і Сr-Мn-Ni сталей в твердому стані після їх гарячої деформації з відносно невеликою тривалістю процесу при товщині прокату до 7 мм. Наукова новизна. Вперше проведені дослідження кінетики азотування корозійностійких сталей Х15Г12 та Х18Н4Г10 в твердому стані при температурах 1200-13500С. Практична значущість. Застосування технології азотування мало та без нікелевих корозійностійких сталей в твердому стані значно підвищує їх якість та знижує їх собівартість. | uk_UA |
dc.description.abstract | ENG: Purpose. Investigation of nitriding kinetics in the solid state of rolled low- and nickel-free corrosion-resistant steels to the full thickness to obtain a stable austenitic structure. Methodology. Nitriding of the samples was performed in a vacuum oven at temperatures of 1200-13500C at exposures from 2 to 30 hours. The temperature was measured with a platinum-platinum-rhodium thermocouple with an accuracy of + 100C. During the heating of the samples, the nitrogen pressure was maintained constant. After extraction of the samples from the furnace, their analysis was performed: X-ray diffraction, layer-by-layer, metallographic and chemical composition, in that case for nitrogen content. Results. The results of this work indicate the fundamental possibility of nitriding Cr-Mn and Cr-Mn-Ni steels in the solid state after their hot deformation with a relatively short duration of the process with a thickness of up to 7 mm. Scientific novelty. For the first time, studies of nitriding kinetics of corrosion-resistant steels Х15Г12 and Х18Н4Г10 in the solid state at temperatures of 1200-13500С were carried out. Practical value. The application of nitriding technology with little and without nickel corrosion-resistant steels in the solid state significantly increases their quality and reduces their cost. | en |
dc.identifier | DOI: 10.34185/tpm.2.2021.03 | en |
dc.identifier.citation | Пройдак Ю. С., Підгорний С. М., Трегубенко Г. М., Поляков Г. А., Палаш Б. В. Дослідження кінетики азотування мало- та безнікелевих корозійностійких сталей в твердому стані. Теорія і практика металургії. 2021. № 2(127). С. 22–29. DOI: 10.34185/tpm.2.2021.03. | uk_UA |
dc.identifier.issn | 1028-2335 | |
dc.identifier.uri | https://nmetau.edu.ua/file/2_2021_zh.pdf | en |
dc.identifier.uri | https://crust.ust.edu.ua/handle/123456789/15403 | en |
dc.language.iso | uk_UA | uk_UA |
dc.publisher | НМетАУ, Дніпро | uk_UA |
dc.subject | корозійностійкі сталі | uk_UA |
dc.subject | азотування | uk_UA |
dc.subject | кінетика | uk_UA |
dc.subject | твердий стан | uk_UA |
dc.subject | дослідження | uk_UA |
dc.subject | азот | uk_UA |
dc.subject | аустеніт | uk_UA |
dc.subject | corrosion-resistant steels | en |
dc.subject | nitriding | en |
dc.subject | kinetics | en |
dc.subject | solid state | en |
dc.subject | research | en |
dc.subject | nitrogen | en |
dc.subject | austenite | en |
dc.subject | КЕМ | uk_UA |
dc.title | Дослідження кінетики азотування мало- та безнікелевих корозійностійких сталей в твердому стані | uk_UA |
dc.title.alternative | Investigation of Nitrogen Kinetics of Little and without Nickel Corrosion-Resistant Steel in the Solid State | en |
dc.type | Article | en |