Термодинамічне моделювання поведінки складових у шлакових системах, що характерні при виробництві марганцевих феросплавів
Loading...
Date
2021
Journal Title
Journal ISSN
Volume Title
Publisher
Інститут чорної металургії ім. З. І. Некрасова НАН України, Дніпро
Abstract
UKR: Метою дослідження є пошук високоефективних схем використання вторинних сировинних матеріалів та безвідходних технологій, що дозволять повернути цінні хімічні елементи у металургійний переділ, насамперед марганцю. Ця проблема не може бути вирішена без теоретичного обґрунтування фізико-хімічних умов, створення яких дозволить досягнути більш повного використання потенціалу корисних властивостей матеріалів, що досліджуються. Аналіз основних фізико-хімічних властивостей марганцевмісних матеріалів, зокрема феросплавних шлаків, дозволить отримати вихідні дані та інтервали значень параметрів, необхідних для подальших досліджень з розробки ефективної технології переробки шлаків марганцевого виробництва. Термодинамічними розрахунками рівноваги у системі Mn-Si-Ca-Al-Mg-O показано, що підвищення кількості вільного оксиду марганцю пов’язано з визначеним значенням основності, досягнення якого забезпечує переважне зв’язування кремнезему у силікати кальцію. Підвищений вміст оксиду магнію підвищує кількість вільних оксидів кремнію та марганцю. Показано, що співвідношення оксидів в системі впливає на в’язкість та кристалізаційні характеристики цієї системи. Ступінь відновлення оксидів визначається активністю компонентів шлакової фази, що залежить від його хімічного складу і температури. Розрахунок активностей у системі на основі оксиду марганцю показав, що зростання основності та вмісту оксиду магнію у системі підвищує активність оксиду марганцю, а добавка оксиду алюмінію – знижую Це співпадає з отриманими даними по розрахунку рівноважного розподілу фаз. Аналіз отриманих в роботі даних розрахунку активностей складових у складній шлаковій системі на основі оксиду марганцю обґрунтовує доцільність повторної переробки металургійних марганцевих шлаків, що дозволить повернути марганець у металургійний переділ.
ENG: The aim of the study is to find highly efficient schemes for the use of secondary raw materials and waste-free technologies that will return valuable chemical elements to the metallurgical redistribution, primarily manganese. This problem cannot be solved without a theoretical substantiation of physicochemical conditions, the creation of which will allow to achieve a fuller use of the potential of the useful properties of the studied materials. Analysis of the main physicochemical properties of manganese-containing materials, in particular ferroalloy slags, will allow to obtain the initial data and intervals of values of parameters necessary for further research on the development of an effective technology for processing manganese slags. Thermodynamic equilibrium calculations in the system Mn-Si-Ca-Al-Mg-O show that the increase in the amount of free manganese oxide is associated with a certain value of basicity, the achievement of which provides the predominant binding of silica to calcium silicates. The increased content of MgO oxide increases the amount of free oxides of silicon and manganese. The ratio of oxides in the system affects the viscosity and crystallization characteristics of this system. The degree of reduction of oxides is determined by the activities of the components of the slag phase, which depends on its chemical composition and temperature. Calculation of activities in the system based on manganese oxide showed that increasing the basicity, and magnesium oxide content in the system increases the activity of manganese oxide and the addition of aluminіum oxide - decreases, which coincides with the data obtained by calculating the equilibrium phase distribution. The analysis of the data obtained in the calculation of the activities of components in a complex slag system based on manganese oxide justifies the feasibility of reprocessing metallurgical manganese slag, which will return manganese to the metallurgical redistribution.
ENG: The aim of the study is to find highly efficient schemes for the use of secondary raw materials and waste-free technologies that will return valuable chemical elements to the metallurgical redistribution, primarily manganese. This problem cannot be solved without a theoretical substantiation of physicochemical conditions, the creation of which will allow to achieve a fuller use of the potential of the useful properties of the studied materials. Analysis of the main physicochemical properties of manganese-containing materials, in particular ferroalloy slags, will allow to obtain the initial data and intervals of values of parameters necessary for further research on the development of an effective technology for processing manganese slags. Thermodynamic equilibrium calculations in the system Mn-Si-Ca-Al-Mg-O show that the increase in the amount of free manganese oxide is associated with a certain value of basicity, the achievement of which provides the predominant binding of silica to calcium silicates. The increased content of MgO oxide increases the amount of free oxides of silicon and manganese. The ratio of oxides in the system affects the viscosity and crystallization characteristics of this system. The degree of reduction of oxides is determined by the activities of the components of the slag phase, which depends on its chemical composition and temperature. Calculation of activities in the system based on manganese oxide showed that increasing the basicity, and magnesium oxide content in the system increases the activity of manganese oxide and the addition of aluminіum oxide - decreases, which coincides with the data obtained by calculating the equilibrium phase distribution. The analysis of the data obtained in the calculation of the activities of components in a complex slag system based on manganese oxide justifies the feasibility of reprocessing metallurgical manganese slag, which will return manganese to the metallurgical redistribution.
Description
А. Надточій: ORCID 0000-0001-5077-0562; Д. Степаненко: ORCID 0000-0002-0184-8295
Keywords
марганцевмісні шлаки, термодинаміка, розподіл фаз, основність, в’язкість, активність, manganese-containing slag, thermodynamics, phase distribution, basicity, viscosity, activity, КТОМП
Citation
Надточій А. А., Степаненко Д. О., Ходотова Н. Є., Киричок В. С. Термодинамічне моделювання поведінки складових у шлакових системах, що характерні при виробництві марганцевих феросплавів. Фундаментальні та прикладні проблеми чорної металургії. 2021. № 35. С. 263–274. DOI: 10.52150/2522-9117-2021-35-263-274.