Визначення приференційного способу виготовлення виробів з металів і сплавів
Loading...
Date
2025
Journal Title
Journal ISSN
Volume Title
Publisher
Український державний університет науки і технологій, ІВК «Системні технології», Дніпро
Abstract
UKR: За результатами аналізу сучасних та відомих критеріїв прогнозування придатності сплавів для виготовлення з них виробів деформуванням або литтям розроблено безрозмірні параметричні критерії та їх кількісні шкали. Використання цих критеріїв дозволить підвищити точність прогнозування їх преференційної придатності до виготовлення з них виробів деформацією або литвом. Для розробки безрозмірних параметричних критеріїв використано феноменологічний підхід до інтерпретації результатів системного аналізу механічних та окремих ливарних властивостей металів і сплавів в умовах невизначеності із запозиченням літературних довідкових даних, результатів експертних оцінок та власних досліджень. Отримані результати дозволять на початкових етапах розробки нових сплавів або технологій виготовлення з них виробів проводити прогнозування доцільності обробки металів та сплавів тиском або литтям безвідносно від їх виду та способу, що заощадить час та витрати як на розробку сплаву, так і на його впровадження у виробництво.
ENG: Based on the results of the analysis of modern and well-known criteria for predicting the suitability of alloys for manufacturing products from them by deformation or casting, dimensionless parametric criteria and their quantitative scales have been developed. The use of these criteria will allow to increase the accuracy of predicting their preferential suitability for manufacturing products from them by deformation or casting. To develop dimensionless parametric criteria, a phenomenological approach was used to interpret the results of a systematic analysis of mechanical and individual casting properties of metals and alloys under conditions of uncertainty, borrowing literature reference data, the results of expert assessments and our own research. The results obtained will allow, at the initial stages of developing new alloys or technologies for manufacturing products from them, to predict the feasibility of processing metals and alloys by pressure or casting, regardless of their type and method, which will save time and costs both for the development of the alloy and for its introduction into production.
ENG: Based on the results of the analysis of modern and well-known criteria for predicting the suitability of alloys for manufacturing products from them by deformation or casting, dimensionless parametric criteria and their quantitative scales have been developed. The use of these criteria will allow to increase the accuracy of predicting their preferential suitability for manufacturing products from them by deformation or casting. To develop dimensionless parametric criteria, a phenomenological approach was used to interpret the results of a systematic analysis of mechanical and individual casting properties of metals and alloys under conditions of uncertainty, borrowing literature reference data, the results of expert assessments and our own research. The results obtained will allow, at the initial stages of developing new alloys or technologies for manufacturing products from them, to predict the feasibility of processing metals and alloys by pressure or casting, regardless of their type and method, which will save time and costs both for the development of the alloy and for its introduction into production.
Description
Т. Кімстач: ORCID 0000-0002-8993-201X; К. Узлов: ORCID 0000-0003-0744-9890; С. Реп'ях: ORCID 0000-0003-0203-4135; О. Білий: ORCID 0000-0003-1234-5404
Keywords
сплав, усадка, деформація, литво, міцність, критерій, структура, alloy, shrinkage, deformation, casting, strength, criterion, structure, КМТОМ, КЛВ
Citation
Кімстач Т. В., Узлов К. І., Реп'ях С. І., Білий О. П. Визначення приференційного способу виготовлення виробів з металів і сплавів. Інформаційні технології в металургії та машинобудуванні – ІТММ’2025 : тези доп. Міжнародної наук.-техн. конф. (м. Дніпро, 23-24 березня 2025 р.). Дніпро, 2025. C. 56–61. DOI: 10.34185/1991-7848.itmm.2025.01.009.