Аналіз набору міцності збірними залізобетонними елементами в зимових умовах
Loading...
Date
2024
Journal Title
Journal ISSN
Volume Title
Publisher
ТОВ “Видавництво “Ліра-К”, Київ
Abstract
UKR: Незважаючи на суттєве домінування монолітного будівництва над збірним, останній спосіб залишається актуальним для інфраструктурного, промислового та громадського будівництва на території України. З огляду на виклики сьогодення, військові дії, енергетичні складнощі, підвищується необхідність прискорення темпів будівництва будівель і споруд, в тому числі в зимових умовах. Цього можна досягти використанням збірних залізобетонних конструкцій, збирання яких потребує мінімальних енерговитрат та логістичних операцій. З огляду на необхідність максимального прискорення циклу виготовлення збірних конструкцій на заводах будівельної індустрії, постачання готової продукції (збірних залізобетонних елементів) на об’єкти будівництва виконується у віці 10-15 діб, при наборі 50-70% проєктної міцності. Подальша витримка і набір міцності прогнозується в умовах, що відрізняються від нормативних, що може знижувати швидкість набору міцності. В межах дослідження виконано вимір міцності збірних залізобетонних елементів, монтаж та витримка яких виконувались в зимових умовах. Вимір виконувався неруйнівним механічним методом (метод пружинного відскоку) електронним склерометром, по більш ніж 50 залізобетонним конструкціям (плитам). Проаналізовано міцність елементів шляхом виміру поверхневої міцності в 10 точках (для кожного елементу), з виключенням явно помилкових значень, розрахунком середньої міцності, визначенням коефіцієнту варіації та середньоквадратичної похибки. Встановлено зниження міцності деяких елементів в результаті витримки в умовах від’ємних температур до моменту набору проєктної міцності. Складено перелік заходів, вживання яких дозволить уникнути зниження міцності та відновити процес набору проєктної міцності.
ENG: Despite the significant dominance of monolithic construction over prefabricated construction, the latter method remains relevant for infrastructure, industrial and public construction in Ukraine. Given the challenges of today, military operations, energy difficulties, there is a growing need to accelerate the pace of construction of buildings and structures, including in winter conditions. This can be achieved through the use of precast concrete structures, the assembly of which requires minimal energy and logistics. Given the need to speed up the precast manufacturing cycle at construction plants as much as possible, finished products (precast concrete elements) are delivered to construction sites within 10-15 days, when they have reached 50-70% of their design strength. Further aging and strength gain is predicted under conditions that differ from the normative ones, which can reduce the rate of strength gain. As part of the study, the strength of precast concrete elements was measured, which were installed and aged in winter conditions. The measurement was performed by a non-destructive mechanical method (spring rebound method) with an electronic sclerometer, on more than 50 reinforced concrete structures (slabs). The strength of the elements was analysed by measuring the surface strength at 10 points (for each element), with the exclusion of obviously erroneous values, calculating the average strength, determining the coefficient of variation and the root mean square error. It was found that the strength of some elements decreased as a result of exposure to negative temperatures until the design strength was reached. A list of measures has been compiled to avoid a decrease in strength and restore the process of gaining design strength.
ENG: Despite the significant dominance of monolithic construction over prefabricated construction, the latter method remains relevant for infrastructure, industrial and public construction in Ukraine. Given the challenges of today, military operations, energy difficulties, there is a growing need to accelerate the pace of construction of buildings and structures, including in winter conditions. This can be achieved through the use of precast concrete structures, the assembly of which requires minimal energy and logistics. Given the need to speed up the precast manufacturing cycle at construction plants as much as possible, finished products (precast concrete elements) are delivered to construction sites within 10-15 days, when they have reached 50-70% of their design strength. Further aging and strength gain is predicted under conditions that differ from the normative ones, which can reduce the rate of strength gain. As part of the study, the strength of precast concrete elements was measured, which were installed and aged in winter conditions. The measurement was performed by a non-destructive mechanical method (spring rebound method) with an electronic sclerometer, on more than 50 reinforced concrete structures (slabs). The strength of the elements was analysed by measuring the surface strength at 10 points (for each element), with the exclusion of obviously erroneous values, calculating the average strength, determining the coefficient of variation and the root mean square error. It was found that the strength of some elements decreased as a result of exposure to negative temperatures until the design strength was reached. A list of measures has been compiled to avoid a decrease in strength and restore the process of gaining design strength.
Description
А. Радкевич: ORCID 0000-0001-6325-8517; А. Нетеса: ORCID 0000-0002-3364-3446; Т. Ткач: ORCID 0000-0002-9433-7514
Keywords
залізобетон, набір міцності, зимові умови, склерометр, ударний метод, неруйнівний контроль, reinforced concrete, strength gain, winter conditions, sclerometer, impact method, non-destructive testing, КБВГ
Citation
Радкевич А., Нетеса А., Ткач Т. Аналіз набору міцності збірними залізобетонними елементами в зимових умовах. Містобудування та територіальне планування. 2024. Вип. 85. С. 526–536. DOI: 10.32347/2076-815x.2024.85.