Кафедра Гідравліка, водопостачання та фізика (З 2022 року кафедра створена шляхом злиття кафедри Гідравлика та водопостачання та кафедри Фізика)

Permanent URI for this community

http://crust.ust.edu.ua/handle/123456789/16428

ENG: Department Hydraulics, water supply and physics

Browse

Now showing 1 - 16 of 16

Analysis of Air Dust Pollution in the Transport Compartment of the Launch Vehicle at the Stage of the Pre-launch Preparation
(Printing House “Technologija”, Kaunas, Lithuania, 2024) Biliaiev, Mykola M.; Biliaieva, Viktoriia V.; Kozachyna, Vitalii A.; Kozachyna, Valeriia V.; Mashykhina, Polina B.; Semenenko, Pavlo
ENG: At the stage of the pre-launch preparation, it is necessary to fulfill very strict environment conditions inside the main fairing where the satellite is located. Namely, it is very important to predict dust concentration inside the main fairing and especially near satellite surface during forced ventilation. To predict air dust pollution inside of main fairing 2D fluid dynamics numerical model has been developed. The governing equations include equation of potential flow to simulate air flow inside the main fairing and equation of pollutant dispersion. Also, empirical model has been used to calculate the number of dust particles fall to the satellite surface. Implicit finite difference schemes of splitting have been used for numerical integration of governing equations. The computer code has been developed on the basis of proposed numerical model. The results of computational experiments to estimate dust concentration field inside the main fairing of the launch vehicle are presented.
Assessment of Radioactive Contamination Level of Environment in Case of Accident at Nuclear Power Plant
(IOP Publishing Ltd, 2023) Biliaiev, Mykola M.; Rusakova, Tetiana I.; Dziuba, Serhii; Lapshin, Yevhen; Koval, Natalia
ENG: The accidents at nuclear power plants pose a particular threat to the population and the environment. Accidental emissions at nuclear power plants can cause long-term radioactive pollution of the environment, and the elimination of such pollution can take years. For practice, it is very important to predict the intensity and size of radioactive contamination zones for various scenarios of extreme situations at the nuclear power plants. Such a forecast will identify the most vulnerable areas and develop a response strategy to the situation that has arisen. A numerical model has been built that allows to quickly predict the scale of radioactive contamination of the territory during an emergency release at a nuclear power plant. The model is based on the application of implicit difference schemes for the numerical integration of the equation of convective-diffusion transport of impurities in the atmosphere. The developed model is characterized by the calculation speed. The results of the computational experiment are presented.
CFD Modeling of Traffic-related Air Pollution in Street Canyon
(Printing House “Technologija”, Kaunas, Lithuania, 2024) Biliaiev, Mykola M.; Biliaieva, Viktoriia V.; Berlov, Oleksandr V.; Kozachyna, Vitalii A.; Kozachyna, Valeriia V.; Yakubovska, Zinaida M.
ENG: High pollution levels are often observed in urban street canyons. Different mathematical models are intensively used to predict pollution levels in urban street canyons. In this paper quick computing 3D CFD model is proposed to compute wind flow over buildings and pollutant dispersion in street canyon. To simulate wind flow over buildings 3D equation of potential flow has been used. Pollutant concentration field has been modelled using three-dimensional equation of pollutant dispersion. Governing equations are also included simplified equations to describe pollutants chemical transformations in atmosphere. To solve numerically governing equations implicit difference schemes have been used. The computer code to realize the proposed numerical models has been developed. Results of numerical experiments are presented.
Evaluation of Gabions Usage Effectiveness for Industrial Facilities Protection Against Damage
(Український державний університет науки і технологій, Дніпро, 2025) Medvedieva, Olha O.; Dziuba, Serhii V.; Kalashnikov, Ivan V.; Biliaiev, Mykola M.; Kozachyna, Vitalii A.
ENG: Purpose. In the extreme situations at industrial sites, various damaging factors may appear, such as the spread of toxic substances in the air, the creation of a fireball, etc., which pose a threat to the lives of workers and have a significant negative impact on the environment. That is why today, special attention is being paid to the problems associated with the spread of debris during a drone attack. At an industrial site where oil product storage facilities are located, the debris generated during an explosion can damage the tank building and cause a fire. In this regard, the main objective of the study is to evaluate the effectiveness of using gabion to reduce the risk of damage to the oil storage facility during the movement of drone debris. Methodology. To achieve this goal, the paper considers the problem of flying debris in the event of a drone explosion at an industrial site where oil storage facilities are located. The use of gabion with sand is proposed to protect the tank building from the throwing effect of debris. It is proposed to develop a mathematical model of the movement of a fragment in the path of which the gabion is located. The effect of gabion as a protective screen on reducing the air temperature near a neighboring oil storage facility in the event of a fire at an industrial site is also considered. A model of the dynamics of a point motion (Newton's second law) was used to mathematically describe the movement of the debris. Numerical integration of the modeling equations was performed using the Euler's method. The energy equation was used to model the process of thermal air pollution at an industrial site during a fire. Findings. In this work, the numerical model was programmed and a computer code was created. The programming language is FORTRAN. The code provides information on the speed of the fragment movement in different parts of each zone. On the basis of the constructed numerical model and the created code, parametric studies were carried out to determine the effectiveness of using gabion with sand to protect the oil storage facility from the effects of fragment. As an approximation, the case when the fragment after the explosion moves horizontally in the direction of the object was considered. The influence of the gabion height on the heating level of the wall of the oil storage facility located at an industrial site was analyzed. Originality. An effective mathematical model has been developed to evaluate the effectiveness of using gabion to protect the oil storage facility from damage by drone fragment. The proposed model allows determining the rational dimensions of the gabion to reduce the risk of damage to the tank wall. An effective computer model of thermal air pollution at an industrial site in the event of a fire at an oil storage facility is presented. Practical value. On the basis of the constructed mathematical model, a computer code was created to conduct a computational experiment to determine the effectiveness of using protective barriers (gabions) on the territory of an industrial site.
Experimental Study of Dust Emission Intensity from the Surface of the Alluvium Beach
(IOP Publishing, 2024) Medvedieva, Olha; Biliaiev, Mykola M.; Kozachyna, Vitalii A.; Mormul, Taras; Buketov, Valentyn
ENG: The paper presents data on the current state of waste storage facilities of mining and processing plants in Kryvyi Rih. They are complex, environmentally hazardous hydraulic structures. When assessing the extent of dust pollution from tailing ponds, it is extremely important to know the intensity of dust emissions from the surface of the alluvium beach. This parameter is the basic one in all prognostic models used to predict environmental pollution. The paper presents the results of experimental studies to determine the wind speed at which the removal of dry dust particles from the surface of the beach of a tailing pond begins, as well as the intensity of dust removal from the surface of the beach for dry sand and wet sand. The experimental studies conducted in the laboratory allowed obtaining data on the intensity of dust emission from the surface of the tailing dump beach. The results obtained by the authors make it possible to more accurately assess the degree of environmental dustiness using predictive models. Тhe data on determining the intensity of dust formation for sand of different moisture content will be useful for determining the effectiveness of dust suppression by supplying water to the beach surface.
Experimental Study of the Intensity of Coal Dust Removal
(Prydniprovs'ka State Academy of Civil Engineering and Architecture, Dnipro, Ukraine, 2023) Biliaiev, Mykola M.; Berlov, Oleksandr V.; Brazaluk, Yuliia V.; Kozachyna, Vitalii A.; Oladipo, Mutiu Olatoye
ENG: Problem statement. Industrial sites where coal storages are located are intensive sources of dust pollution of the environment. There is an important problem of assessing the intensity of dust removal into the atmospheric air from polluted areas. Knowledge of the intensity of dust removal into the atmospheric air makes it possible to scientifically assess the impact of contaminated sites on the pollution of the environment and work zones at industrial sites. The solution to this problem can be obtained experimentally. The purpose of the article. An experimental study of the value of the air flow velocity at which the detachment of dust particles from the surface with coal begins and their removal into the air and the determination of the intensity of the emission of coal dust from the contaminated surface. Methodology. The intensity of removal of coal dust from the contaminated area was studied experimentally in laboratory conditions. The research was conducted on coal samples from DTEK “Pavlohradvuhillya”, grade “ДГ. During the research, the velocity of the air flow at which the process of movement of dust particles along the emission source began and the velocity of “detachment” of dust particles and their removal from the emission source were determined. At the second stage of experimental research, the intensity of removal of coal dust from the polluted area was determined. Scientific novelty. The values of the air velocity at which the removal of coal dust particles from the contaminated area begins were determined experimentally. The regularity of the intensity of the removal of coal dust depending on the velocity of the air flow over the contaminated area was obtained. Practical significance. The obtained experimental data make it possible to determine under which weather conditions there is a risk of dust formation and the removal of dust into the atmosphere. The empirical dependence obtained by processing experimental data can be used for a scientifically based assessment of the level of pollution of working areas at industrial sites where there are coal storage facilities. Conclusions. The value of the velocity of the air flow at which the movement of dust particles on the contaminated surface begins, as well as the value of the velocity of the air flow at which the removal of dust particles into the air begins, was determined experimentally. The resulting empirical model can be used to estimate environmental damage due to dust pollution of atmospheric air.
Identifying Regularities in the Propagation of Air Ions in Rooms with Artificial Air Ionization
(PC TECHNOLOGY CENTER, 2023) Levchenko, Larysa; Burdeina, Nataliia; Glyva, Valentyn; Kasatkina, Natalia; Biliaiev, Mykola M.; Biliaieva, Viktoriia V.; Tykhenko, Oksana; Petrunok, Tetiana; Biruk, Yana; Bogatov, Oleg
ENG: The object of the study is the dynamics of air ion spread in rooms from the source of artificial air ionization under different starting conditions. There is currently the problem of distribution of air ions in the room with regulatory concentrations in all critical zones. An effective method of ensuring proper air ion concentrations is to model their propagation from ionization sources. Existing approaches to calculating the dynamics of air ions of both polarities have been improved in this study. Unlike known solutions, the impact on their concentration of electrostatic field and the interaction of air ions with suspended particles was taken into account. A model of air ion propagation in rooms with artificial air ionization and the principles of its numerical modeling was built. The use of Laplace Equation in the aerodynamic model instead of the Navier-Stokes equation for the potential of the flow rate has made it possible to design an "Ion 3D" tool, which reduces the time of implementation of one scenario from several hours to 7 seconds. Modeling of the propagation of air ions of both polarities in the room under different initial conditions was carried out. Two-dimensional and three-dimensional models with their visualization was implemented. The peculiarity of the resulting models is that they make it possible to determine the concentrations of air ions in any section of the room by three coordinates. Given this, the rapid selection of the variants of the source data makes it possible to achieve the normative values of concentrations of air ions in the area of breathing – exceeding 500 cm-3 of each polarity. Simulation makes it possible to design a room in which, under the condition of artificial ionization of air, the concentrations of air ions close to the optimal values of 3000–5000 cm-3 are provided.
Mathematical Models for Water Treatment Problems
(Український державний університет науки і технологій, Дніпро, 2025) Biliaiev, Mykola M.; Kozachyna, Vitalii A.; Kyrychenko, M. V.; Skuratov, M. O.; Chirkov, A. O.; Filonenko, H. K.
ENG: Purpose. Assessing the efficiency of water treatment in different structures is a problem of big importance. To solve this a problem, it is necessary to have mathematical models that allow to quickly obtain data on the cleaning effect in different structures. The aim of the work is to develop numerical models to determine the efficiency of water treatment in an aeration tanks, settlers and mixers. Methodology. For mathematical modeling of the process of water treatment in a bioreactor, balance equations were used. These equations allow to determine concentrations of substrate, activated sludge and dissolved oxygen in s structure. The Monod model is used to calculate the substrate oxidation process. To study effectiveness of water treatment process in vertical settler Euler’s equation were used with convective-diffusive equation. To simulate reagent mixing in mixer equation of potential and convective-diffusive equation were used. To solve governing equations finite- difference schemes of splitting were used. Findings. A tool for theoretical assessment mass transfer processes in aeration tank, vertical settler, mixer was developed. Originality. Effective numerical models to simulate water treatment in bioreactor, vertical settler, mixer were developed. Fundamental equations of Fluid Dynamics and Mass Transfer were used to build the models. Proposed models can be used in practice at the stage of «sketch designing». The models take into account the main physical parameters which influence the process of Mass Transfer and are quick computing. Practical value. The constructed mathematical model can be useful during the reconstruction and designing structures for water treatment. Computer programs have been developed to carry out numerical experiment. The results of a computer experiment are presented.
Methodology for Modeling the Spread of Radioactive Substances in Case of an Emergency Release at a Nuclear Power Plant
(National Technical University «Kharkiv Polytechnic Institute», Kharkiv, 2023) Levchenko, Larysa; Biliaiev, Mykola M.; Biliaieva, Viktoriia V.; Ausheva, Nataliia; Tykhenko, Oksana
ENG: The methodology for modeling the propagation of accidental releases of radionuclides from a power unit of a nuclear power plant has been developed. The calculation method takes into account the most critical factors propagation cloud - wind direction and speed, the intensity of the release radionuclides change: semi-continuous release, long-term release, instantaneous release. Diffuse processes and the presence of interference in the form of buildings were also taken into account. To solve the modeling equation of the aerodynamic model, the velocity potential equation is solved. The use of this equation instead of the traditional Novier-Stokes equation makes it possible to rationalize the calculation process in terms of the speed obtaining simulated data. To build a numerical model, a rectangular difference grid is used. The velocity potential and the quantities values of volumetric activity are determined at the centers of difference cells. The value of the airflow velocity vector component is determined on the sides of the difference cells. A finite-difference splitting scheme is used for numerical integration of the equation convective-diffusion transfer radionuclides. A computer code was developed on the basis of the constructed numerical model, the programming language Fortran was used. The approach used makes it possible to reduce the time for obtaining one scenario of an accident development. The cloud propagation dynamics determining is carried out almost in real time. This allows you to quickly respond to changing situations and make adequate decisions.
Modeling Ground Waters Dynamics and Pollution
(Prydniprovs'ka State Academy of Civil Engineering and Architecture, Dnipro, Ukraine, 2024) Biliaiev, Mykola M.; Kozachyna, Valeriia V.
ENG: Problem statement. Large accumulators of liquid waste (e.g., mine water ponds, tailing ponds, etc.) are long-term sources that change the hydrological regime. A negative consequence of this process is flooding of the territory. In addition, the infiltration of contaminated water from such hazardous sources changes the quality of groundwater. Therefore, it is important to analyze the impact of such anthropogenic sources on the process of flooding and deterioration of groundwater quality. To solve this problem, it is very important to use the method of mathematical modeling as an effective mean of researching problems of this class, since the use of physical modeling is practically impossible within the scope of problems of this class. The purpose of the article. Development of numerical models for predicting changes in the hydrological regime (flooding of the territory) and groundwater quality under the influence of anthropogenic pollution sources. Methodology. To assess the dynamics of changes in the hydrological regime, a two-dimensional equation of filtration of a non-pressure groundwater flow is used. A two-dimensional geomigration equation (planned model) is used to analyze changes in groundwater quality during infiltration of contaminated water from the settling pond. This equation takes into account the convective transfer of contaminants in the filtration flow, dispersion, and the intensity of contaminant infiltration into the groundwater flow. The method of total approximation is used for numerical integration of the filtration equation. For the numerical integration of the geomigration equation, an implicit splitting scheme is used. Scientific novelty. Effective numerical models for rapid assessment of changes in groundwater dynamics and quality under the influence of anthropogenic sources that change the hydrological regime are proposed. The constructed numerical models take into account a set of important physical factors that affect the process of geomigration and flooding of the territory, namely: filtration coefficient, variable depth of free-flowing groundwater, dispersion, intensity of the source of impurity emission into the groundwater flow. This makes it possible to obtain a comprehensive assessment of the process of flooding and groundwater pollution.. Practical significance. A computer code has been created that allows practical usage of the developed numerical models. This code is an effective tool for theoretical study of non-stationary processes of territory flooding and anthropogenic groundwater pollution. Conclusions. A numerical model for calculating groundwater dynamics has been developed. The model allows to predict the level of groundwater rise under the influence of a man-made source of wastewater infiltration from a settling pond. A numerical model for calculating the process of geomigration from an anthropogenic source of emissions has been developed. The model makes it possible to predict the dynamics of contamination zone formation in a non-pressure groundwater flow. The developed numerical models take into account the most important parameters that affect the formation of flooding zones and groundwater contamination.
Modeling Influence of TiO2 Barrier Coating on Pollutant Dispersion Near Road
(Kaunas University of Technology, 2023) Biliaiev, Mykola M.; Berlov, Oleksandr V.; Biliaieva, Viktoriia V.; Kozachyna, Vitalii A.; Kozachyna, Valeriia; Yakubovska, Zinaida M.
ENG: Mitigation strategies for near-road air pollution are of great interest nowadays. Sound barriers near the road are very effective to decrease pollutant concentration. The use of titanium dioxide (TiO2) barrier coating provides additional effect which allows to decrease pollutant concentration near road. In this study quick- computing CFD model was developed to access influence of TiO2 barrier coating on pollutant concentration. To simulate wind flow over barrier with TiO2 coating model of potential flow was used. The process of NOx dispersion from car was computed using mass conservation equation. Finite-difference schemes were used for numerical integration of governing equations. The computer code was developed on the basis of proposed numerical model. Results of numerical simulations are presented.
Numerical Analysis of Aerodynamic Regime Near Tailings Storage Facility
(IOP Publishing Ltd, 2023) Semenenko, Yevhen; Medvedieva, Olha; Biliaiev, Mykola M.; Rusakova, Tetiana I.; Blyuss, Konstantin
ENG: Tailings formed during the mining and beneficiation of iron ore are sources of intensive dust generation. In order to assess the intensity of dust formation and determine the effectiveness of methods of its reduction, it is necessary to know the local velocity of the air flow near the various surfaces of the tailings storage facility. For the theoretical solution of this problem, a CFD model was developed, which allows determining the velocity field of the air flow when flowing around the tailings storage facility. The model allows you to obtain the value of the wind speed near the surfaces of the structure and, based on this information, to make a forecast of possible dust formation. The constructed CFD model is based on the use of an aerodynamic model of potential motion. The modeling equation is the Laplace equation for the velocity potential. To build a numerical model, the idea of establishing a solution in time is used, therefore numerical integration of the "unsteady equation" for the velocity potential is carried out. Numerical integration is carried out using the finite-difference method of total approximation. The results of the computational experiment are presented.
Numerical Modeling of Groundwater Dynamics and Heat and Mass Transfer Processes
(Pridneprovs’ka State Akademy of Civil Engineering and Architecture, USUST, Dnipro, Ukraine, 2024) Biliaiev, Mykola M.; Kozachyna, Vitalii A.; Kirichenko, Pavlo S.; Kozachyna, Valeriia V.; Kaidash, M. D.
ENG: Problem statement. Groundwater is undergoing significant anthropogenic impact in many countries around the world. This impact results in changes in groundwater levels and deterioration of their quality. Protecting groundwater from anthropogenic impact involves solving several important tasks. A significant number of tasks are related to the need to predict the processes of filtration and heat and mass transfer in underground flows. In this regard, it is important to have specialized mathematical models as a modern scientific research tool. It should be noted that the use of physical experiments for problems of this class is significantly limited, due to the high cost of equipment, considerable time spent on setting up and conducting the experiment. The purpose of the article. Development of a set of numerical models for simulation of filtration and heat and mass transfer processes in groundwater. Methodology. To model the process of non-pressure flow of groundwater, the equation of non-pressure filtration is used. The two-dimensional equation of convective-diffusive movement of a pollutant is used to model the process of mass transfer of an impurity in groundwater. To model the process of heat transfer in groundwater, in the problem of groundwater freezing, a two-dimensional energy equation is used. For numerical integration of modeling equations, finite-difference schemes are used. Scientific novelty. Numerical models of filtration and heat and mass transfer processes have been developed that allow real-time analysis of changes in groundwater quality and thermal regime. Practical significance. The developed numerical models make it possible to quickly analyze non-stationary processes of heat and mass transfer in groundwater when developing drainage systems in flooded areas. Conclusions. Numerical models of filtration and heat and mass transfer in groundwater have been developed. For the practical use of the built models, standard hydrological information is required. The models make it possible to analyze the dynamics of ice formation in groundwater during the implementation of the technology of freezing groundwater flow.
Numerical Modeling of the Wind Regime on the Beaches of the Wash of the Artificial Storage Facilities for Mineral Processing Waste
(IOP Publishing, 2024) Lapshyn, Yevhen; Biliaiev, Mykola M. ; Biliaieva, Viktoriia V. ; Halchenko, Zariana; Medianyk, Volodymyr; Buketov, Valentyn
ENG: A 2D numerical model has been developed to estimate the airflow velocity field when flowing around the dam of an artificial storage facility for mineral processing waste. To solve the aerodynamic problem of determining the air flow velocity field when flowing around such hydraulic structures with a complex geometric shape, a potential motion model was applied. The numerical integration of the equation for the velocity potential is carried out using the Liebman method. The geometric shape of the tailings storage facility is formed in a discrete model using the marking method. A computer program was created to implement the developed numerical aerodynamics model. Based on the processing of the results of computational experiments, coefficients were obtained that allow us to quickly determine the value of the air flow velocity at the beginning and end of the tailing pond beach, i.e. in the area of the most intense dust emission. This allows for a quick prediction of the risk of dust air pollution at different tailing pile heights.
Quick computing CFD model to predict chemical pollution in room
(Український державний університет науки і технологій, Дніпро, 2025) Biliaiev, Mykola M.; Biliaieva, Viktoriia V.; Berlov, Oleksandr V.; Kozachyna, Vitalii A.; Mashykhina, Polina B.
ENG: Purpose. The problem of accidental contamination of workspaces attracts special attention, since in the event of such extreme situations, intense chemical contamination of the air in work areas occurs. This poses a threat of toxic exposure to workers. When assessing the consequences of such situations, it is necessary to take into account the time factor, in particular, to quickly determine the creation of concentrations of chemically hazardous substances. In this regard, an urgent task is to develop effective mathematical models for rapid assessment of the consequences of extreme situations in the working areas of chemically hazardous facilities. The paper considers a CFD model for analyzing the process of chemical air pollution in a workspace during an accidental release of a chemically hazardous substance. The solution of the problem is based on the numerical integration of the fundamental equations of continuum mechanics. Methodology. To calculate the air velocity field in the working room during the operation of supply and exhaust ventilation, a mathematical model of the motion of an inviscid fluid was used. The equation of convective diffusion motion was used to calculate the concentration of a chemically hazardous substance in the workspace. The integration of the modeling equations was carried out using finite difference schemes. Findings. A dynamic model has been created to calculate the spread of a chemically hazardous substance in a work-space. On the basis of the built CFD model, a computer program was created to conduct a computational experiment. Originality. A CFD model has been created to predict the level of air pollution in a workspace in the event of toxic gas emissions. The model is based on the fundamental equations of aerodynamic mechanics and mass transfer. The model makes it possible to determine the effect of the ventilation mode, the intensity of emission of a chemically hazardous substance, the location of equipment in the workspace, and the dynamics of the formation of concentration fields. Practical value. The developed CFD model can be used to quickly analyze the consequences of accidental emissions of a chemically hazardous substance in a workplace and assess the risk of toxic exposure of workers.
Simulation of Chemical Accident with Ammonia at the Pipe Line
(Kaunas University of Technology, 2023) Biliaiev, Mykola M.; Berlov, Oleksandr V.; Biliaieva, Viktoriia V.; Kozachyna, Vitalii A.; Kozachyna, Valeriia; Mashykhina, Polina B.
ENG: Ammonia is transported through Ukraine via the Togliatti-Odesa ammonia pipeline. The hostilities in Ukraine pose a risk of damage to this transportation system as a result of a shell, mine, etc. hitting the transportation system. Therefore, it is very important to predict the possible consequences of environmental pollution in the event of such an extreme situation. A numerical model was developed to solve this problem. The three-dimensional equation of convective-diffusive transport of an impurity in the atmosphere is used to predict the dynamics of pollution of atmospheric air and the underlying surface. Finite-difference splitting schemes are used to numerically integrate this equation. On the basis of the constructed numerical model, a computer code was developed to take into account the change in the intensity of ammonia leakage from the damaged pipeline. The results of a computational experiment are presented.

Browse

Results Per Page

Sort Options