CRUST | Browsing by Author "Kozachyna, Vitalii A."

Browsing by Author "Kozachyna, Vitalii A."

Now showing 1 - 20 of 35

Analysis of Air Dust Pollution in the Transport Compartment of the Launch Vehicle at the Stage of the Pre-launch Preparation
(Printing House “Technologija”, Kaunas, Lithuania, 2024) Biliaiev, Mykola M.; Biliaieva, Viktoriia V.; Kozachyna, Vitalii A.; Kozachyna, Valeriia V.; Mashykhina, Polina B.; Semenenko, Pavlo
ENG: At the stage of the pre-launch preparation, it is necessary to fulfill very strict environment conditions inside the main fairing where the satellite is located. Namely, it is very important to predict dust concentration inside the main fairing and especially near satellite surface during forced ventilation. To predict air dust pollution inside of main fairing 2D fluid dynamics numerical model has been developed. The governing equations include equation of potential flow to simulate air flow inside the main fairing and equation of pollutant dispersion. Also, empirical model has been used to calculate the number of dust particles fall to the satellite surface. Implicit finite difference schemes of splitting have been used for numerical integration of governing equations. The computer code has been developed on the basis of proposed numerical model. The results of computational experiments to estimate dust concentration field inside the main fairing of the launch vehicle are presented.
Analysis of Temperature Field in the Transport Compartment of the Launch Vehicle
(Kaunas University of Technology, Kaunas, 2022) Biliaiev, Mykola M.; Rusakova, Tetiana I.; Biliaieva, Viktoriia V.; Kozachyna, Vitalii A.; Berlov, Oleksandr V.; Semenenko, Pavlo
ENG: The development of satellite linkage systems is based on the satellite’s transportation in space. The transportation of a satellite into orbit is carried out by a launch vehicle. The satellite is located in the transport compartment inside the main fairing. At the stage of the pre-launch preparation, it is necessary to fulfill very strict environment conditions inside the main fairing. Namely, it is very important to predict temperature field in the transport compartment inside the main fairing during its forced ventilation at the stage of pre-launch preparation. To calculate the temperature field formed by the ventilation of the transport compartment and release of heat from different elements of the satellite, the energy equation was used. This equation took into account the intensity of heat release from different parts of satellite, air flow pattern over the satellite, heat transfer in the transport compartment. The non-uniform field of the air flow velocity in the transport compartment was calculated on the basis of the potential flow model. The finite difference schemes were used for numerical integration of modeling equations. The computer code has been developed that implements the proposed numerical model. The results of computational experiments to estimate the temperature regime in the main fairing of the launch vehicle for different satellites is presented.
Anti-Terror Engineering in the Case of Possible Terrorist Attacks with Chemical Agents
(Дніпропетровський національний університет залізничного транспорту імені академіка В. Лазаряна, Дніпро, 2018) Biliaev, Nikolai N.; Berlov, Oleksandr V.; Kalashnikov, Ivan V.; Kozachyna, Vitalii A.
ENG: Purpose. This work aims to develop a method of local outdoor reduction of the concentration of a chemically hazardous substance, which entered the atmosphere through a cafe roof vent. It also involves the creation of a numerical model for calculating the chemical contamination zone that allows assessing the effectiveness of the screens used to minimize its level. Methodology. To solve this problem, we used the velocity potential equation that al-lowed to determine the air flow velocity field, and the equation of convective diffusion dispersion of a chemically hazardous agent in the atmospheric air emitted through the ventilation system in case of a terrorist attack. The simulation took into account the uneven velocity field of the wind flow, atmospheric diffusion, emission rate of a chemically hazardous agent. In the numerical integration of the velocity potential equation, we used the Liebmann method. For the numerical solution of the equation of convective diffusion dispersion of the impurity, an implicit alternate-triangular difference splitting scheme was used. Findings. The developed numerical model allowed assessing the effectiveness of building screens used to reduce the concentration of a hazardous substance and minimize the risk of toxic damage to people outdoor during an initiated emission of a chemical agent. The constructed numerical model can be implemented on computers of low and medium power, which allows it to be widely used for solving problems of the class under consideration when developing an anti-terror engineering strategy. Originality. An effective numerical model for calculating the outdoor chemical contamination zone during a possible terrorist attack using a chemical (biological) agent has been proposed. The model can also be applied to assess the effectiveness of some protective measures aimed at reducing the air pollution level during a terrorist attack. Practical value. The developed numerical model can be used to organize protective actions near social objects of a possible chemical attack by a terrorist.
Atmosphere Pollution Modeling in the Case of Accident During Rocket Propellant Transportation by Trains
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Biliaiev, Mykola M.; Biliaieva, Viktoriia V.; Kozachyna, Vitalii A.; Berlov, Oleksandr V.; Gunko, Olena Yu.; Chernyatyeva, Kateryna
EN: Abstract. At present time, in Ukraine the intensive development of solid-propellant missiles takes place. These missiles are called «Grim», «Grim-2», etc. Transportation of rocket propellant very often is carried out by trains. In the case of accident during such transportation great amount of toxic chemicals may be emitted into atmosphere. It is very important to predict the atmosphere pollution level near railways transport corridors to obtain the realistic information about the size of possible zones of hitting. To forecast the atmosphere pollution in the case of rocket propellant burning in railway wagon numerical models have been developed. These models are developed to predict the atmosphere pollution in two scales. The first scale is the simulation of the atmosphere pollution near the railway tracks (so called “local scale”). The second scale is the simulation of the atmosphere pollution on the territory which is adjacent to the railway tracks («urban scale»). The forecast is based on the Lagrangian model of toxic chemical dispersion. The models allow also to predict acid rain formation in the case of solid propellant burning products dispersion into atmosphere. To solve the governing equations we used difference schemes of splitting. The results of numerical experiments are presented.
Calculation of the Efficiency of the Horisontal Settler with Baffles
(Саратов, 2014) Biliaiev, Nikolay N.; Kozachyna, Vitalii A.; Polubinskaja, E. V.
EN: The main purpose of this paper is development of the effective CFD model which can be used for computation speed field of the flow in the horizontal settlers which takes into account the geometrical form of the settler.
Calculation of «Vulnerability» Zone in Case of Terrorist Attack with Chemical Agents
(Дніпропетровський національний університет залізничного транспорту ім. акад. В. Лазаряна, Дніпро, 2018) Biliaiev, Mykola M.; Berlov, Oleksandr V.; Kalashnikov, Ivan V.; Kozachyna, Vitalii A.
EN: Purpose. The work involves the development of a numerical model for calculating the «vulnerability» zone of a possible terrorist attack objective with the use of a chemical agent in a builtup environment. The «vulnerability» zone is a territory near the attack objective, where the emission of a chemical agent during the attack will lead to undesirable consequences. The emission of a chemical agent outside the «vulnerability» zone will not create a dangerous concentration near the attack objective. Methodology. To solve this problem, we use the equation for the velocity potential, on the basis of which we determine the wind stream velocity field, and the equation adjoint to the equation of mass transfer in the atmospheric air of the chemical agent emitted in the event of a terrorist attack. During simulation, we take into account the uneven wind stream velocity field, atmospheric diffusion and the rate of emission of a chemically hazardous substance. For the numerical integration of the velocity potential equation, we use the method of A. A. Samarsky. For numerical solution of the adjoint equation, we introduce new variables and use an implicit difference splitting scheme. The peculiarity of the developed numerical model is the possibility of operative estimation of the «vulnerability» zone near a possible attack objective. Findings. The developed numerical model and computer program can be used for scientifically grounded assessment of the «vulnerability» zone near significant facilities in the event of possible attacks with the use of chemical (biological) agents. The constructed numerical model can be implemented on computers of small and medium power, which allows it to be widely used to solve the problems of this class when developing the emergency response plan. The results of the computational experiment are presented, which allow us to evaluate the possibilities of the proposed numerical model. Originality. An effective numerical model is proposed for calculating the «vulnerability» zone near the facility, which may be the target of a terrorist attack with the use of a chemical agent. The model is based on the numerical integration of the velocity potential equation and the equation adjoint to the equation of mass transfer of a chemically dangerous substance in the atmosphere. Practical value. The developed model can be used to organize protective actions near the target facility of a possible chemical attack by terrorists.
CFD Modeling of Traffic-related Air Pollution in Street Canyon
(Printing House “Technologija”, Kaunas, Lithuania, 2024) Biliaiev, Mykola M.; Biliaieva, Viktoriia V.; Berlov, Oleksandr V.; Kozachyna, Vitalii A.; Kozachyna, Valeriia V.; Yakubovska, Zinaida M.
ENG: High pollution levels are often observed in urban street canyons. Different mathematical models are intensively used to predict pollution levels in urban street canyons. In this paper quick computing 3D CFD model is proposed to compute wind flow over buildings and pollutant dispersion in street canyon. To simulate wind flow over buildings 3D equation of potential flow has been used. Pollutant concentration field has been modelled using three-dimensional equation of pollutant dispersion. Governing equations are also included simplified equations to describe pollutants chemical transformations in atmosphere. To solve numerically governing equations implicit difference schemes have been used. The computer code to realize the proposed numerical models has been developed. Results of numerical experiments are presented.
Constructing a Method for Assessing the Effectiveness of Using Protective Barriers Near Highways to Decrease the Level of Air Pollution
(ПП ТЕХНОЛОГІЧНИЙ ЦЕНТР, Харків, 2021) Biliaiev, Mykola M.; Kozachyna, Vitalii A.; Biliaieva, Viktoriia V.; Rusakova, Tetiana I.; Berlov, Oleksandr V.; Mala, Yuliia
ENG: Highways are an intensive source of environmental pollution. Atmospheric air is exposed to the fastest anthropogenic influence. Therefore, a particularly important task is to minimize the level of air pollution near the highway. An effective method for solving this problem is the use of protective barriers of various shapes installed near highways. At the stage of designing these protective structures, an important task arises to assess their effectiveness. Estimation of the effectiveness of protective barriers by the method of the physical experiment takes considerable time to set up and conduct an experiment, as well as analyze the results of hysical modeling. This method is not always convenient during design work. An alternative method is the method of mathematical modeling. For the designer, it is very important to have mathematical models that make it possible to quickly obtain a predictive result and take into consideration a set of important factors on which the effectiveness of the protective barrier depends. A method has been devised that makes it possible to assess the effectiveness of using protective barriers to reduce the level of air pollution near the highway. It was found that an increase in barrier height by 80 % leads to a 22 % decrease in the concentration of impurities behind the barrier. It was established that applying a barrier with a height of 1.5 m leads to a 26 % decrease in the concentration of impurities in buildings adjacent to the highway. A method has been devised to assess the effectiveness of using absorbent "TX Active" surfaces on the protective barrier located near the highway. This study's result revealed that the application of a barrier with one "TX Active" surface leads to a decrease in the concentration of NO behind the barrier by an average of 43 %. When using a barrier with two "TX Active" surfaces, a decrease in the NO concentration behind the barrier is 85 % on average.
Development of a Method for Assessing Air Dustiness in the Main Fairing of the Launch Vehicle
(PC Тесhnology Сеntеr, Kharkiv, Ukraine, 2022) Biliaiev, Mykola M.; Biliaieva, Viktoriia V.; Rusakova, Tetiana I.; Kozachyna, Vitalii A.; Berlov, Oleksandr V.; Semenenko, Pavlo; Kozachyna, Valeriia; Brazaluk, Iuliia; Klym, Viktoriia; Tatarko, Larysa
ENG: The object of this study is the process of thermostating the main fairing with a satellite at the stage of prelaunch preparation of the launch vehicle. When thermostating, it is necessary to predict the risk of dust contamination of the satellite surface. Currently, there are no normative methods for solving this problem. A numerical model has been proposed that makes it possible to quickly predict the dynamics of pollution of any surface of the satellite. A numerical model has been built for analyzing the zones of dust pollution of air in the main fairing of the launch vehicle during thermostating. The novelty of the model is the use of the Laplace equation for the speed potential, based on which the problem of aerodynamics is solved, namely, the flow rate in the main fairing is determined. Based on the model built, a computational experiment was conducted for dust particles with a diameter of 6 μm that fall into the main fairing during thermostating. The results of the research showed that the formation of areas of dust pollution near the satellite is influenced by the geometric shape of the satellite, which affects the formation of an uneven air velocity field in the main fairing and the organization of air supply to the main fairing. Calculations are performed within a few seconds, which makes it possible during working day to conduct a set of studies into the rational choice of the organization of air exchange of the main fairing during its thermostating. The constructed numerical model can be used in design organizations to scientifically substantiate the thermostating mode of the main fairing, taking into consideration the characteristics of the satellite located in it.
Emergency Burning of Solid Rocket Propellant: Damage Risk Assessment to People in the Workplace
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, Dnipro, 2020) Biliaiev, Mykola M.; Berlov, Oleksandr V.; Biliaieva, Viktoriia V.; Kozachyna, Vitalii A.; Kalashnikov, Ivan V.
EN: Purpose. This work includes the development of a computer model to calculate the risk of thermal damage to people in the shop in case of emergency burning of solid rocket propellant. Methodology. To calculate the temperature field in the shop in order to determine the zones of thermal damage to workers in the building, the equation expressing the law of energy conservation was used. Based on this modeling equation, the temperature field in the shop is calculated in the presence of a source of heat emission – burning solid rocket propellant. To calculate the velocity field of air flow in the shop, taking into account the location of obstacles in the path of heat wave propagation, we used the model of vortex-free air motion – the equation of the velocity potential. A two-step finite difference scheme of conditional approximation is used to numerically solve the equation for the velocity potential. A difference splitting scheme was used to numerically solve the energy equation. At the first stage of construction of the difference splitting scheme of the two-dimensional energy equation into the system of one-dimensional equations is performed. Each one-dimensional equation allows you to calculate the temperature change in one coordinate direction. The point-to-point computation scheme is used to determine the temperature. When conducting a computational experiment, the air exchange in the building is taken into account. The risk assessment of thermal damage to personnel in the building is performed for different probabilities of the place of emergency combustion of solid rocket propellant. Findings. Using numerical model prediction of the potential risk areas of thermal damage to staff in the shop for a variety of emergency situations was performed. Originality. A computer model for rapid assessment of the potential risk of damage to people in the shop in case of emergency burning of solid rocket propellant was constructed. Practical value. The authors developed a code that allows you to quickly simulate the temperature fields formation in the shop in case of emergency burning of solid rocket propellant and to identify potential areas of thermal damages to workers based on this information. The developed computer program can be used to assess the risk of thermal damage in the chemical industry in case of emergency.
Evaluation of Gabions Usage Effectiveness for Industrial Facilities Protection Against Damage
(Український державний університет науки і технологій, Дніпро, 2025) Medvedieva, Olha O.; Dziuba, Serhii V.; Kalashnikov, Ivan V.; Biliaiev, Mykola M.; Kozachyna, Vitalii A.
ENG: Purpose. In the extreme situations at industrial sites, various damaging factors may appear, such as the spread of toxic substances in the air, the creation of a fireball, etc., which pose a threat to the lives of workers and have a significant negative impact on the environment. That is why today, special attention is being paid to the problems associated with the spread of debris during a drone attack. At an industrial site where oil product storage facilities are located, the debris generated during an explosion can damage the tank building and cause a fire. In this regard, the main objective of the study is to evaluate the effectiveness of using gabion to reduce the risk of damage to the oil storage facility during the movement of drone debris. Methodology. To achieve this goal, the paper considers the problem of flying debris in the event of a drone explosion at an industrial site where oil storage facilities are located. The use of gabion with sand is proposed to protect the tank building from the throwing effect of debris. It is proposed to develop a mathematical model of the movement of a fragment in the path of which the gabion is located. The effect of gabion as a protective screen on reducing the air temperature near a neighboring oil storage facility in the event of a fire at an industrial site is also considered. A model of the dynamics of a point motion (Newton's second law) was used to mathematically describe the movement of the debris. Numerical integration of the modeling equations was performed using the Euler's method. The energy equation was used to model the process of thermal air pollution at an industrial site during a fire. Findings. In this work, the numerical model was programmed and a computer code was created. The programming language is FORTRAN. The code provides information on the speed of the fragment movement in different parts of each zone. On the basis of the constructed numerical model and the created code, parametric studies were carried out to determine the effectiveness of using gabion with sand to protect the oil storage facility from the effects of fragment. As an approximation, the case when the fragment after the explosion moves horizontally in the direction of the object was considered. The influence of the gabion height on the heating level of the wall of the oil storage facility located at an industrial site was analyzed. Originality. An effective mathematical model has been developed to evaluate the effectiveness of using gabion to protect the oil storage facility from damage by drone fragment. The proposed model allows determining the rational dimensions of the gabion to reduce the risk of damage to the tank wall. An effective computer model of thermal air pollution at an industrial site in the event of a fire at an oil storage facility is presented. Practical value. On the basis of the constructed mathematical model, a computer code was created to conduct a computational experiment to determine the effectiveness of using protective barriers (gabions) on the territory of an industrial site.
Experimental Study of Dust Emission Intensity from the Surface of the Alluvium Beach
(IOP Publishing, 2024) Medvedieva, Olha; Biliaiev, Mykola M.; Kozachyna, Vitalii A.; Mormul, Taras; Buketov, Valentyn
ENG: The paper presents data on the current state of waste storage facilities of mining and processing plants in Kryvyi Rih. They are complex, environmentally hazardous hydraulic structures. When assessing the extent of dust pollution from tailing ponds, it is extremely important to know the intensity of dust emissions from the surface of the alluvium beach. This parameter is the basic one in all prognostic models used to predict environmental pollution. The paper presents the results of experimental studies to determine the wind speed at which the removal of dry dust particles from the surface of the beach of a tailing pond begins, as well as the intensity of dust removal from the surface of the beach for dry sand and wet sand. The experimental studies conducted in the laboratory allowed obtaining data on the intensity of dust emission from the surface of the tailing dump beach. The results obtained by the authors make it possible to more accurately assess the degree of environmental dustiness using predictive models. Тhe data on determining the intensity of dust formation for sand of different moisture content will be useful for determining the effectiveness of dust suppression by supplying water to the beach surface.
Experimental Study of the Intensity of Coal Dust Removal
(Prydniprovs'ka State Academy of Civil Engineering and Architecture, Dnipro, Ukraine, 2023) Biliaiev, Mykola M.; Berlov, Oleksandr V.; Brazaluk, Yuliia V.; Kozachyna, Vitalii A.; Oladipo, Mutiu Olatoye
ENG: Problem statement. Industrial sites where coal storages are located are intensive sources of dust pollution of the environment. There is an important problem of assessing the intensity of dust removal into the atmospheric air from polluted areas. Knowledge of the intensity of dust removal into the atmospheric air makes it possible to scientifically assess the impact of contaminated sites on the pollution of the environment and work zones at industrial sites. The solution to this problem can be obtained experimentally. The purpose of the article. An experimental study of the value of the air flow velocity at which the detachment of dust particles from the surface with coal begins and their removal into the air and the determination of the intensity of the emission of coal dust from the contaminated surface. Methodology. The intensity of removal of coal dust from the contaminated area was studied experimentally in laboratory conditions. The research was conducted on coal samples from DTEK “Pavlohradvuhillya”, grade “ДГ. During the research, the velocity of the air flow at which the process of movement of dust particles along the emission source began and the velocity of “detachment” of dust particles and their removal from the emission source were determined. At the second stage of experimental research, the intensity of removal of coal dust from the polluted area was determined. Scientific novelty. The values of the air velocity at which the removal of coal dust particles from the contaminated area begins were determined experimentally. The regularity of the intensity of the removal of coal dust depending on the velocity of the air flow over the contaminated area was obtained. Practical significance. The obtained experimental data make it possible to determine under which weather conditions there is a risk of dust formation and the removal of dust into the atmosphere. The empirical dependence obtained by processing experimental data can be used for a scientifically based assessment of the level of pollution of working areas at industrial sites where there are coal storage facilities. Conclusions. The value of the velocity of the air flow at which the movement of dust particles on the contaminated surface begins, as well as the value of the velocity of the air flow at which the removal of dust particles into the air begins, was determined experimentally. The resulting empirical model can be used to estimate environmental damage due to dust pollution of atmospheric air.
Investigation of Admixture Sedimentation in the Horizontal Settler
(Дніпропетровський національний університет залізничного транспорту імені академіка В. Лазаряна, Дніпро, 2016) Kozachyna, Vitalii A.
EN: Purpose. Sedimentation by gravity is the most common and extensively applied treatment process for the removal of solids from water and wastewater and it has been used for over one hundred years. Sedimentation tanks are one of the major parts of a treatment plant especially in purification of turbid flows. Horizontal settlers are mainly used for purification of high quantity of water. In these tanks, the low speed turbid water will flow through the length of the tank and suspended particle have enough time to settle. Finding new and useful methods for calculating and increasing hydraulic efficiency of horizontal settlers is the objective of many theoretical, experimental and numerical studies. But currently used models and methods in Ukraine do not allow taking into account geometrical form and various design features. In this paper the numerical model was developed to evaluate the effectiveness of horizontal settler with modified structure. Methodology. Numerical model is based on: 1) equation of viscous fluid dynamics; 2) mass transfer equation. For numerical simulation the finite difference schemes are used. The numerical calculation is carried out on a rectangular grid. For the formation of the computational domain markers are used. Findings.The model allows obtaining the purification process in the settler with different form and different configuration of baffles. Originality. A new approach to investigate the mass transfer process in horizontal settler was proposed. This approach is based on the developed CFD model. The fluid dynamics model was used for the numerical investigation of flows and waste waters purification. To investigate influence of baffles on settler efficiency physical experiment was carried out. Practical value.The developed model has more capacity than the existing models in Ukraine. The developed model allows computing quickly the efficiency of water purification in settlers. The model is not computationally expensive. Calculation time of one variant of the problem takes few minutes.
Mathematical Modeling of Shock Wave Interaction with Wagon
(IOP Publishing, 2020) Khrutch, V. K.; Biliaiev, Mykola M.; Kozachyna, Vitalii A.; Berlov, Oleksandr V.; Kirichenko, Pavlo S.; Biliaieva, Viktoriia V.
EN: In case of some accidents on railways there may be situations when the shock wave appears and interacts with different objects on the railway (wagons, cargo, buildings etc.). In these cases it is necessary to predict the possible effect of shock wave diffraction on the different objects. Study of these problems on the basis of physical experiments (laboratory experiment or field experiment) demand expensive and unique experimental facility. In some cases physical experiment can’t be set. That is why mathematical simulation plays the important role in solving problem connected with shock wave propagation. For practice it is necessary to have predictive quick computing mathematical models which allow to perform numerical experiment on the basis of non-powerful computers. Now, in Ukraine, there is a real deficit of mathematical models which allow to compute quickly shock wave interaction with different objects. The aim of this work was development of quick computing numerical model to simulate shock wave propagation and its interaction with the wagons. The model is based on the numerical integration of Euler equations which are written in integral form. To solve modeling equations difference scheme of splitting was used. Results of numerical modeling are presented.
Mathematical Models for Water Treatment Problems
(Український державний університет науки і технологій, Дніпро, 2025) Biliaiev, Mykola M.; Kozachyna, Vitalii A.; Kyrychenko, M. V.; Skuratov, M. O.; Chirkov, A. O.; Filonenko, H. K.
ENG: Purpose. Assessing the efficiency of water treatment in different structures is a problem of big importance. To solve this a problem, it is necessary to have mathematical models that allow to quickly obtain data on the cleaning effect in different structures. The aim of the work is to develop numerical models to determine the efficiency of water treatment in an aeration tanks, settlers and mixers. Methodology. For mathematical modeling of the process of water treatment in a bioreactor, balance equations were used. These equations allow to determine concentrations of substrate, activated sludge and dissolved oxygen in s structure. The Monod model is used to calculate the substrate oxidation process. To study effectiveness of water treatment process in vertical settler Euler’s equation were used with convective-diffusive equation. To simulate reagent mixing in mixer equation of potential and convective-diffusive equation were used. To solve governing equations finite- difference schemes of splitting were used. Findings. A tool for theoretical assessment mass transfer processes in aeration tank, vertical settler, mixer was developed. Originality. Effective numerical models to simulate water treatment in bioreactor, vertical settler, mixer were developed. Fundamental equations of Fluid Dynamics and Mass Transfer were used to build the models. Proposed models can be used in practice at the stage of «sketch designing». The models take into account the main physical parameters which influence the process of Mass Transfer and are quick computing. Practical value. The constructed mathematical model can be useful during the reconstruction and designing structures for water treatment. Computer programs have been developed to carry out numerical experiment. The results of a computer experiment are presented.
Modeling Coal Dust Dispersion from Pile with Protection Barriers
(EDP Sciences, 2020) Biliaiev, Mykola M.; Biliaieva, Viktoriia V.; Berlov, Oleksandr V.; Kozachyna, Vitalii A.; Kirichenko, Pavlo S.; Oladipo, Mutiu Olatoye; Poltoratskа, Viktoriia
EN: Abstract. The results of laboratory studies to evaluate the effectiveness of barriers which are used to reduce dust pollution from the coal pile are presented. The use of the Г-shaped barrier, which is set differently near the coal pile model, has been studied. A numerical model is proposed to compute coal dust concentration in the air near the pile. The Navier–Stokes equations are used to model the wind flow over the coal pile. These equations are written in the variables "vorticity-stream function". To simulate the process of coal dust dispersion from the coal pile, the equation of convective-diffusion transfer of the passive impurity is used. For numerical integration of the modeling equations, difference schemes of splitting are used. Developed numerical model allows to perform numerical experiments taking into account the complex geometric shape of the pile and screens. The results of the computational experiments are presented.
Modeling Influence of TiO2 Barrier Coating on Pollutant Dispersion Near Road
(Kaunas University of Technology, 2023) Biliaiev, Mykola M.; Berlov, Oleksandr V.; Biliaieva, Viktoriia V.; Kozachyna, Vitalii A.; Kozachyna, Valeriia; Yakubovska, Zinaida M.
ENG: Mitigation strategies for near-road air pollution are of great interest nowadays. Sound barriers near the road are very effective to decrease pollutant concentration. The use of titanium dioxide (TiO2) barrier coating provides additional effect which allows to decrease pollutant concentration near road. In this study quick- computing CFD model was developed to access influence of TiO2 barrier coating on pollutant concentration. To simulate wind flow over barrier with TiO2 coating model of potential flow was used. The process of NOx dispersion from car was computed using mass conservation equation. Finite-difference schemes were used for numerical integration of governing equations. The computer code was developed on the basis of proposed numerical model. Results of numerical simulations are presented.
Modeling of Noise Pollution Near Railway
(European Scientific Institute, ESI, 2020) Biliaiev, Mykola M.; Biliaieva, Viktoriia V.; Berlov, Oleksandr V.; Kozachyna, Vitalii A.
EN: Noise from railway transport is a relevant problem from the point of view of people health. Now, in Ukraine, the railway traffic infrastructure has the period of development. It is important to predict railway transport noise impact in case of changing of transport infrastructure. Existing in Ukraine predictive models are based on empirical formulae which were obtained long ago for specific conditions and do not take into account some important factors. So, these models can’t be used for existing problems which are connected with railway transport noise. The aim of this work was development of numerical predictive model to forecast noise from railway transport. The model is built on the numerical integration of wave equation for acoustic pressure. Some results of numerical experiment are presented.
Modeling of the Atmosphere Pollution From Coal Trains
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Biliaiev, Mykola M.; Kozachyna, Vitalii A.; Biliaieva, Viktoriia V.; Oladipo, Mutiu Olatoye; Chernyatyeva, Kateryna
EN: Abstract. Coal trains have an intensive impact on environment pollution. It is very important to predict adequately this impact during coal transportation. In Ukraine to predict atmosphere pollution from coal trains the regulatory model «OND-86» is used. This model does not take into account some important factors and coal train movement. We present numerical models to solve two problems:1) prediction of atmosphere pollution in the case of moving coal train; 2) prediction of atmosphere pollution in the case of additional special boards installation on the coal wagon. To solve these problems equation of coal duct convective- diffusive dispersion (Lagrange model of admixture dispersion) and equation of potential flow were used. Governing equations were numerically integrated using implicit difference schemes. For coding difference equations we used FORTRAN language. We present results of numerical experiments and laboratory experiments which illustrate the efficiency of the special additional boards installation on the coal wagon. These boards have «internal wing» and «external wing». The obtained results illustrate that installation of additional boards allows to minimize the atmosphere pollution near transport corridor.

Browsing by Author "Kozachyna, Vitalii A."

Results Per Page

Sort Options