Дослідження щільності макроструктури виливків із вторинного сплаву системи Al-Si при модифікуванні високодисперсним карбідом кремнію
Loading...
Date
2024
Journal Title
Journal ISSN
Volume Title
Publisher
Український державний університет науки і технологій, ІВК «Системні технології», Дніпро
Abstract
UKR: У дослідженні аналізується вплив модифікації вторинного алюмінієвого ливарного сплаву системи Al-Si високодисперсним карбідом кремнію на щільність металу та макроструктуру циліндричних виливків. Виявлено, що швидкість твердіння та структура металу залежать від типу форми (металева або піщано-глиняна) та кількості доданого SiC. Сплави з добавкою 0,1% SiC, розлиті у металеву форму, мають найбільшу щільність. Макроструктура виливків модифікованих SiC характеризується наявністю глибоких усадкових раковин та концентрованої пористості. Виливки, залиті у піщано-глиняну форму з модифікацією SiC, виявляють концентровану усадку та газові пори, що відповідає низькому балу за еталонною шкалою. Дослідження підкреслює важливість вибору методу лиття та модифікації сплаву для оптимізації щільності та структури виливків.
ENG: The study analyzes the impact of modifying a secondary aluminum casting alloy of the Al-Si system with high-dispersion silicon carbide on the density of the metal and the macrostructure of cylindrical castings. It was found that the solidification rate and the structure of the metal depend on the type of mold (metal or sand-clay) and the amount of added SiC. Alloys with a 0.1% SiC addition, cast in a metal mold, have the highest density. The macrostructure of SiC-modified castings is characterized by the presence of deep shrinkage cavities and concentrated porosity. Castings poured into a sand-clay mold with SiC modification show concentrated shrinkage and gas pores, which corresponds to a low grade on the reference scale. The study highlights the importance of choosing the casting method and alloy modification to optimize the density and structure of the castings.
ENG: The study analyzes the impact of modifying a secondary aluminum casting alloy of the Al-Si system with high-dispersion silicon carbide on the density of the metal and the macrostructure of cylindrical castings. It was found that the solidification rate and the structure of the metal depend on the type of mold (metal or sand-clay) and the amount of added SiC. Alloys with a 0.1% SiC addition, cast in a metal mold, have the highest density. The macrostructure of SiC-modified castings is characterized by the presence of deep shrinkage cavities and concentrated porosity. Castings poured into a sand-clay mold with SiC modification show concentrated shrinkage and gas pores, which corresponds to a low grade on the reference scale. The study highlights the importance of choosing the casting method and alloy modification to optimize the density and structure of the castings.
Description
В. Селівьорстов: ORCID 0000-0002-1916-625X; Ю. Доценко: ORCID 0000-0002-7734-7884; Т. Селівьорстова: ORCID 0000-0002-2470-6986; В. Гладких: ORCID 0000-0002-7279-8133
Keywords
дослідження, вторинний ливарний сплав системи Al-Si, модифікація, карбід кремнію, лиття, щільність, макроструктура, research, secondary casting alloy of the Al-Si system, modification, silicon carbide, casting, density, macrostructure, КІТС, КЛВ, КЕМ (ІПБТ)
Citation
Селівьорстов В. Ю., Доценко Ю. В., Селівьорстова Т. В., Гладких В. А. Дослідження щільності макроструктури виливків із вторинного сплаву системи Al-Si при модифікуванні високодисперсним карбідом кремнію. Інформаційні технології в металургії та машинобудуванні – ІТММ’2024 : тези доп. Міжнародної наук.-техн. конф. (м. Дніпро, 10–11 квітня 2024 р.). Дніпро, 2024. C. 513–515. DOI: https://doi.org/10.34185/1991-7848.itmm.2024.01.099.