Дослідження процесу різання сортового прокату на рейкобалочних та великосортних станах
Loading...
Date
2025
Journal Title
Journal ISSN
Volume Title
Publisher
Український державний університет науки і технологій, ІВК «Системні технології», Дніпро
Abstract
UKR: Метою роботи є дослідження умов різання останньої штанги мірної довжини та залишку прокату в умовах нестабільної довжини розкату, що є наслідком коливань розмірів заготівок та температурного режиму прокатки. В роботі показано, що величина залишку, починаючи з якого треба різати на дві штанги нормальної довжини, визначається економічною доцільністю, що дорожче – штанга мірної довжини та залишок або дві штанги нормальної довжини. Наведено вираз для отримання величини залишку в залежності від міри штанги мірної довжини, коефіцієнтів вартості штанг нормальної довжини та відходів. Для умов прокатки швелера 24 на стані 800 величина залишку складає 0,86 м. Показано, що для забезпечення максимального прибутку в залежності від величини залишку, остання штанга мірної довжини може бути порізана такими способами: на штангу мірної довжини та залишок, на дві штанги нормальної довжини або на штангу мірної довжини та штангу нормальної довжини.
ENG: The aim of the work is to study the conditions of cutting the last bar of the measured length and the remaining rolled product under conditions of unstable rolling length, which are realized as a result of fluctuations in the sizes of the blanks and the temperature regime of rolling. The work shows that the amount of the remainder, starting from which it is necessary to cut into two bars of normal length, is determined by economic feasibility, which is more expensive – a bar of measured length and a remainder or two bars of normal length. An expression is given for obtaining the residual value depending on the size of the bar of the measured length, the cost coefficients of the bars of the normal length and waste. For the conditions of rolling the channel 24 on the mill 800, the remainder value is 0.86 m. It is shown that to ensure maximum profit depending on the remainder value, the last bar of the measured length can be cut in the following ways: into a bar of the measured length and the remainder, into two bars of the normal length or into a bar of the measured length and a bar of the normal length.
ENG: The aim of the work is to study the conditions of cutting the last bar of the measured length and the remaining rolled product under conditions of unstable rolling length, which are realized as a result of fluctuations in the sizes of the blanks and the temperature regime of rolling. The work shows that the amount of the remainder, starting from which it is necessary to cut into two bars of normal length, is determined by economic feasibility, which is more expensive – a bar of measured length and a remainder or two bars of normal length. An expression is given for obtaining the residual value depending on the size of the bar of the measured length, the cost coefficients of the bars of the normal length and waste. For the conditions of rolling the channel 24 on the mill 800, the remainder value is 0.86 m. It is shown that to ensure maximum profit depending on the remainder value, the last bar of the measured length can be cut in the following ways: into a bar of the measured length and the remainder, into two bars of the normal length or into a bar of the measured length and a bar of the normal length.
Description
М. Зінченко: ORCID 0000-0003-4381-9692; О. Потап: ORCID 0000-0001-8643-0228; А. Бурчак: ORCID 0009-0009-1075-888X; М. Михайловський: ORCID 0000-0002-9960-6189
Keywords
довжина розкату, різання, штанга мірної довжини, штанга нормальної довжини, залишок, rolling length, cutting, bar of measured length, bar of normal length, remainder, КАВП
Citation
Зінченко М. Д., Потап О. Ю., Бурчак А. А., Михайловський М. В. Дослідження процесу різання сортового прокату на рейкобалочних та великосортних станах. Інформаційні технології в металургії та машинобудуванні – ІТММ’2025 : тези доп. Міжнародної наук.-техн. конф. (м. Дніпро, 23-24 березня 2025 р.). Дніпро, 2025. C. 133–137. DOI: 10.34185/1991-7848.itmm.2025.01.022.