Сучасне застосування графоаналітичного методу розрахунку сталевих ферм
Loading...
Date
2024
Journal Title
Journal ISSN
Volume Title
Publisher
Український державний університет науки і технологій, Дніпро
Abstract
UKR: Мета. Основною метою публікації є кількісна оцінка точності і вірогідності застосування графоаналітичного методу визначення розподілу зусиль в елементах сталевої кроквяної ферми на основі використання сучасного комплексу AutoCAD. Методика. Для досягнення поставленої мети були розглянуті три проєкти магазину продовольчих і непродовольчих товарів, розташованих в містах Збараж, Новоград-Волинський і Кривий Ріг. Покриття магазинів в усіх трьох випадках виконані на основі плоских сталевих ферм, які і були прийняті в якості об’єкту досліджень. Реалізація графоаналітичного методу побудови діаграми Максвелла-Кремони виконувалось на базі комплексу AutoCAD. Навантаження приймались відповідно до реальних умов експлуатації за чинним стандартом ДБН В.1.2-2:2006. Оцінка точності побудови діаграми Максвелла-Кремони виконувалось на основі співставлення із чисельним методом будівельної механіки – методом скін-
чених елементів на базі проєктно-обчислювального комплексу SCAD вітчизняної розробки. Результати. Проведене кількісне співставлення величин та характеру розподілу внутрішніх зусиль в елементах сталевих ферм покриття показало, що в середньому розбіжність між графоаналітичним методом і методом скінчених елементів не перевищує 3 %. Також використання графоаналітичного методу дозволяє отримувати повний розподіл зусиль в конструкцій ферми, не потребуючи навичок користування спеціалізованими пакетами
прикладних програм чисельного аналізу, таких як SCAD або Lira. Наукова новизна. В ході проведеного аналізу визначено ступінь теоретичного співпадіння результатів графоаналітичного і чисельного підходів до оцінки розподілу внутрішніх зусиль в елементах сталевих ферм покриття. Практична значимість. Отримані результати оцінки вірогідності використання графоаналітичного методу відкривають перспективи його широкого використання в якості альтернативи аналітичним або чисельним методам будівельної механіки
для сучасних ускладнених «польових» умов, коли виникає необхідність в наданні швидкої оцінки несучій здатності пошкодженої або зруйнованої будівельної конструкції.
ENG: Purpose. The main purpose of the publication is to quantify the accuracy and probability of applying the graph-analytical method of determining the distribution of forces in the elements of a steel rafter truss based on the use of the modern AutoCAD complex. Methodology. To achieve the formulated purpose, three projects of food and non-food stores located in the cities of Zbarazh, Novohrad-Volynskyi and Kryvyi Rih were considered. The covering of stores in all three cases is made on the basis of flat steel trusses, which were accepted as the object of research. The implementation of the graph-analytical method of constructing the Maxwell-Cremona diagram was carried out on the basis of the AutoCAD complex. The loads were taken in accordance with the actual operating conditions according to the current DBN standard B.1.2-2:2006. The assessment of the accuracy of the Maxwell-Cremona diagram construction was carried out on the basis of a comparison with the numerical method of construction mechanics – the method of finite elements based on the SCAD design and calculation complex of domestic development. Findings. A quantitative comparison of the values and character of the distribution of internal forces in the elements of steel trusses of the coating showed that, on average, the divergence between the graph-analytical method and the finite element method does not exceed 3%. Also, the use of the graph-analytical method allows obtaining the full distribution of forces in truss structures, without requiring the skills of using specialized packages of numerical analysis application programs, such as SCAD or Lira. Originality. In the course of the conducted analysis, the degree of theoretical coincidence of the results of graph-analytical and numerical approaches to the assessment of the distribution of internal forces in the elements of the steel trusses of the coating was determined. Practical value. The obtained results of the assessment of the probability of using the graph-analytical method open the prospects of its widespread use as an alternative to analytical or numerical methods of construction mechanics for modern complicated «field» conditions, when there is a need to provide a quick assessment of the bearing estimation of a dam-aged or destroyed building structure.
ENG: Purpose. The main purpose of the publication is to quantify the accuracy and probability of applying the graph-analytical method of determining the distribution of forces in the elements of a steel rafter truss based on the use of the modern AutoCAD complex. Methodology. To achieve the formulated purpose, three projects of food and non-food stores located in the cities of Zbarazh, Novohrad-Volynskyi and Kryvyi Rih were considered. The covering of stores in all three cases is made on the basis of flat steel trusses, which were accepted as the object of research. The implementation of the graph-analytical method of constructing the Maxwell-Cremona diagram was carried out on the basis of the AutoCAD complex. The loads were taken in accordance with the actual operating conditions according to the current DBN standard B.1.2-2:2006. The assessment of the accuracy of the Maxwell-Cremona diagram construction was carried out on the basis of a comparison with the numerical method of construction mechanics – the method of finite elements based on the SCAD design and calculation complex of domestic development. Findings. A quantitative comparison of the values and character of the distribution of internal forces in the elements of steel trusses of the coating showed that, on average, the divergence between the graph-analytical method and the finite element method does not exceed 3%. Also, the use of the graph-analytical method allows obtaining the full distribution of forces in truss structures, without requiring the skills of using specialized packages of numerical analysis application programs, such as SCAD or Lira. Originality. In the course of the conducted analysis, the degree of theoretical coincidence of the results of graph-analytical and numerical approaches to the assessment of the distribution of internal forces in the elements of the steel trusses of the coating was determined. Practical value. The obtained results of the assessment of the probability of using the graph-analytical method open the prospects of its widespread use as an alternative to analytical or numerical methods of construction mechanics for modern complicated «field» conditions, when there is a need to provide a quick assessment of the bearing estimation of a dam-aged or destroyed building structure.
Description
Д. Банніков: ORCID 0000-0002-9019-9679;
Д. Кіхтенко: ORCID 0009-0009-4196-2314;
О. Осадча: ORCID 0009-0004-5715-047Х;
М. Гололобов: ORCID 0009-0008-3939-594X
Keywords
сталева ферма, ферма покриття, графоаналітичний метод, діаграма Максвелла-Кремони, метод скінчених елементів, комплекс SCAD, steel truss, covering truss, graph-analytical method, Maxwell-Cremona diagram, finite element method, SCAD complex, КБВГ
Citation
Банніков Д. О., Кіхтенко Д. С., Осадча О. Р., Гололобов М. О. Сучасне застосування графоаналітичного методу розрахунку сталевих ферм. Мости та тунелі: теорія, дослідження, практика. 2024. Вип. 26. С. 5–17. DOI: 10.15802/bttrp2024/315281.